Atlantic Boilers MULTI-ELEC STANDARD 525 Technical Manual - Page 15

Browse online or download pdf Technical Manual for Boiler Atlantic Boilers MULTI-ELEC STANDARD 525. Atlantic Boilers MULTI-ELEC STANDARD 525 17 pages.

5)

MAINTENANCE

Effective maintenance must aim at preventing :-
a). a reduction in the influx of fresh water through the boiler
- this can result in the formation of sediment or limescale on the
boiler immersion heater elements
b). pockets of high temperature water across the boiler immersion heater
elements – resulting in their destruction by overheating
c). accumulation of sediment or limescale within the boiler, particularly on
or around the boiler immersion heater elements – overcoming these
developments by the introduction of small amounts of fresh, clean water
without any inhibitor or de-scaling agent
Minimum maintenance periods
A). Monthly maintenance
i).
Check operation of the automatic air vent
ii). Check operation of the water flow switch
iii). Check operation of the safety valve
B). Annual maintenance
i).
Carry out the monthly checks
ii).
Check all electrical connections
iii).
Check all the electric control functions
iv). Check all pipework joints are water-tight
v). Drain off small amount of boiler water content and check for condition
C). 3-yearly maintenance
i).
Carry out the annual maintenance
ii).
Isolate the boiler safely from all services
iii).
Drain the boiler of water and open up for inspection
iv).
Check for all maintenance requirements and remedy as necessary
v).
Close and seal the boiler, fill with fresh clear water through drain outlet
vi).
Pressure test, then repeat annual maintenance procedure
15