Electrolux ICON E40PV100FS Use & Care Manual Installation Instructions - Page 8
Browse online or download pdf Use & Care Manual Installation Instructions for Ventilation Hood Electrolux ICON E40PV100FS. Electrolux ICON E40PV100FS 24 pages. Electrolux vent hood e40pv100fs
Also for Electrolux ICON E40PV100FS: Installation Manual (9 pages)
Print Page
8
Getting Started
OPERATING YOUR HOOD
The hood is operated using the slide controls under the front edge of the hood.
The light switch turns the halogen lights on and off.
BLOWER
BLOWER
LIGHT
ON/OFF
SPEED
SWITCH
SWITCH
CONTROL
WARNING
The Auto-Start Heat Sensing System thermostat can start the blower even if the hood is
turned OFF. When this occurs, it is impossible to turn the blower OFF with its switch. If you
must stop the blower, do it from the main electrical panel.
The blower on/off switch turns the blower on to the running
speed set by the blower speed control. The blower must be
turned on and off using this switch.
The blower speed control changes the running speed of the
blower (1-2-3).
The pilot lamp lights up whenever the blower is on.
PILOT
Auto-Start Heat Sensing System
LAMP
Your hood is equipped with an Auto-Start Heat Sensing
System thermostat. This thermostat is a device that will turn
on or speed up the blower if it senses excessive heat above
Figure 1
the cooking surface.
1 If blower is OFF - it turns blower ON to HIGH speed.
2 If blower is ON at a lower speed setting - it turns blower
up to HIGH speed.
When the temperature level drops to normal, the blower will
return to its original setting.