Bosch KIR51 series User Manual - Page 18
Browse online or download pdf User Manual for Refrigerator Bosch KIR51 series. Bosch KIR51 series 24 pages.
Also for Bosch KIR51 series: Instructions For Use Manual (20 pages), User Manual (24 pages), User Manual (22 pages), Instructions For Use Manual (20 pages)
Print Page
en Troubleshooting
12 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
cooling, the displays
and lighting are lit.
The LED lighting does
not work.
The temperature dif-
fers greatly from the
setting.
The base of the refri-
gerator compartment
is wet.
The appliance hums,
bubbles, buzzes,
gargles or clicks.
The appliance makes
noises.
18
Cause and troubleshooting
Showroom mode is switched on.
Carry out the appliance self-test. → Page 20
▶
a Once the appliance self-test has ended, the appli-
ance switches to normal operation.
Different causes are possible.
Call customer service.
▶
The customer service number can be found in the
enclosed customer service directory.
Different causes are possible.
Switch off the appliance. → Page 13
1.
Switch the appliance back on after five minutes.
2.
→ Page 13
If the temperature is too warm, check the temper-
‒
ature again after a couple of hours.
If the temperature is too cold, check the temper-
‒
ature again on the following day.
The condensation channel or drainage hole are
blocked.
Clean the condensation channel and the drainage
▶
hole. → Page 16
Not a fault. A motor is running, e.g. refrigerating unit,
fan. Refrigerant flows through the pipes. The motor,
switches or solenoid valves are switching on or off.
No action required.
Fittings wobble or stick.
Check the removable fittings and, if required, re-
▶
place these.