Atlantic Ultraviolet Sanidyne 40-0674B Installation Operation & Maintenance - Page 8
Browse online or download pdf Installation Operation & Maintenance for Accessories Atlantic Ultraviolet Sanidyne 40-0674B. Atlantic Ultraviolet Sanidyne 40-0674B 20 pages. Germicidal ultraviolet portable area sanitizer
Print Page
H
-H
r
anD
elD
emote
Lamp operation indicators.
Illuminate yellow when lamps are on.
*Numbers 10 and 15 both bring up Settings menu.
General Rule of Selection: Except for the ON/OFF button located on the top-right edge of the Hand-held Remote Controller, all
selections made to this device will require a gentle touch of a short period of time to achieve a response.
1. ON/OFF Button: Turns the power to the device on or off and can be used to restart the device. The ON/OFF button will
require the button to be pushed in, and held until the red light on the top left lights; vibration of the device is felt. Contains
choice to: Restart / Power Off / Airplane Mode; ON – OFF (MUST BE SET TO ON AT ALL TIMES). Additionally
displays three icons at bottom which are Sound Off / Vibrate / Sound On.
2. Treatment Time: Set treatment time in Hours, Minutes. Hold finger on Treatment Time to select until menu changes
to scroll bar. Scroll the numbers up or down, positioning the times chosen in the center row. When times are positioned
correctly, select "DONE" on the screen to input your Treatment Time choice.
3. Current Time: Displays current time in Hours, Minutes, Seconds. Can be reset under SETTINGS, however this requires a
PIN Number to do this. (See "Setting Date and Time" on Page 12)
4. Lamp Operation Indicators: Lamp status glows yellow when the lamps are operating correctly. If lamp is not operating the
lamp status will be displayed grey for that lamp. (Remote Overview Continued on Page 9)
8
C
o
ontroller
verview
Figure 3 – Hand-held Remote Controller Overview
Start
Pause
Stop