DRIFT GHOST N2 Quick Manual - Page 11

Browse online or download pdf Quick Manual for Action Cameras DRIFT GHOST N2. DRIFT GHOST N2 16 pages.

Print Page

Remote Control & Setup (for developers)

With camera's IP address, you can use HTTP commands to configure or manipulate your camera

remotely from either a computer or mobile device.

Command list:

1. Zoom in/out

http://192.168.4.148/cgi-bin/foream_remote_control?dzoom=1

where the value set to dzoom can be from 1 to 10.

2. Setup RTMP live streaming

http://192.168.4.148/cgi-bin/foream_remote_control?start_rtmp_with_param=192.168.3.133:1935/liv

e/5&stream_res=720P&stream_bitrate=2000000

where 192.168.3.133:1935/live/5 stands for the URL of your RTMP server, here rtmp:// is omitted.

You can also setup the livestream resolution & bitrate with this command.

Note：in case the RTMP URL contains 【&】 character, please replace it with 【***】.

3. Stop live stream

http://192.168.4.148/cgi-bin/foream_remote_control?stop_rtmp

4. Setup Livestream Resolution

http://192.168.4.148/cgi-bin/foream_remote_control?stream_res=0

where the value of stream_res can be:

3(1080P), 4(720P), 5(WVGA).

5. Setup Livestream Bitrate

http://192.168.4.148/cgi-bin/foream_remote_control?stream_bitrate=1000000

where stream bitrate value is in Byte, 1000000 means 1Mbyte, 8Mbps.

6. Setup Livestream Framerate

http://192.168.4.148/cgi-bin/foream_remote_control?stream_framerate=30

1080P（1920 * 1080,16：9）：

720P（1280 * 720，16：9）：

WVGA（854 * 480，16：9）

7. Start Recording

http://192.168.4.148/cgi-bin/foream_remote_control?start_record

Version 1.0.0.1

30 / 60FPS

Date: 2022-01-22