Bosch 3 Instruction Manual - Page 13

Browse online or download pdf Instruction Manual for Vacuum Cleaner Bosch 3. Bosch 3 20 pages. Multifuel stove-defra exempt smokeless fuel
Also for Bosch 3: Manual For Installation And Utilisation (18 pages), Original Instructions Manual (22 pages), Installation, Servicing And User Instructions Manual (36 pages)

Print Page

■ When adding contents which are to be

sliced or shredded, apply only light pres-

sure to the pusher. Remove the pusher

and add ingredients through the feed tube.

Warning!

Empty the bowl before it becomes so full

that the cutting or grating contents reach the

carrier disc.

After using the appliance

■ Set the rotary switch to P.

■ Remove mains plug.

■ Rotate the lid in an anti-clockwise direction

and remove.

■ Remove tool:

Take tool holder together with universal

blade, whisking disc or kneading hook out

of the bowl. Remove the tools from the tool

holder.

■ Take out the cutting discs by the plastic

stud in the centre. Take tool holder out of

the bowl.

■ Rotate bowl anti-clockwise and remove.

■ Clean all parts, see "Cleaning and

servicing".

Blender

Blade insert with blender/cutting blade for

mixing liquid or semi-solid food, for cutting/

chopping raw fruit and vegetables, for purée-

ing food.

W Risk of injury from sharp blades /

rotating drive!

Never place fingers in the attached blender!

Do not remove/attach the blender until the

drive is at a standstill. Do not touch blades of

the blade insert with bare hands. Clean them

with a brush.

W Risk of scalding!

If processing hot liquids, steam escapes

through the funnel in the lid. Add a max.

0,4 litres of hot or frothing liquid.

Warning!

Blender may be damaged. Do not process

deep-frozen ingredients (except ice cubes).

Do not operate blender when empty.

Fig. D

■ Place seal on the blade insert. Ensure that

the seal is positioned correctly.

Important information

If the seal is damaged or not correctly

positioned, liquid may run out.

■ Insert blade insert with blender/cutting

blade p into the blender jug and lock

anti-clockwise (m). Rotate the blade insert

at least until the arrow matches up with the

marking on the blender jug.

■ Turn blender jug over (blade insert face

down).

■ Attach the blender jug (match arrow on the

jug to the dot on the appliance .) and

rotate as far as possible in a clockwise

direction (,).

■ Add ingredients.

Maximum capacity, liquid = 1.0 litres (froth-

ing or hot liquids max. 0.4 litres). Optimal

processing capacity –

solids = 80 g.

■ Attach lid and press firmly. Hold lid while

working.

■ Insert the mains plug.

■ Set the rotary switch to the desired setting.

■ To add more ingredients, set the rotary

switch to P.

■ Remove the lid and add ingredients

■ remove the funnel and gradually add solid

ingredients through the refill opening

■ pour liquid ingredients through the funnel.

After using the appliance

■ Set the rotary switch to P.

■ Remove mains plug.

■ Rotate the blender in an anti-clockwise

direction and remove.

■ Remove lid.

■ Loosen blade insert clockwise (l) and

remove from the blender jug.

■ Clean all parts, see "Cleaning and

servicing".

Universal cutter

Use (depending on model):

– With the blade insert with blender/cutting

blade p for cutting and chopping meat,

hard cheese, onions, herbs, garlic, fruit,

vegetables.

Operation