Bosch 6 Series Instructions For Installation And Use Manual - Page 7

Print Page

Bosch 6 Series Instructions For Installation And Use Manual

1Operating the appliance

O p e r a t i n g t h e a p p l i a n c e

These instructions apply to several appliance variants. It

is possible that individual features are described which

do not apply to your appliance.

Note:

Switch on the extractor hood when you start cooking

and switch it off again several minutes after you have

finished cooking. This is the most effective way of

removing the kitchen fumes.

Control panel

Symbol

Explanation

Fan on/off

1-3

Fan settings

Intensive mode

Light on/off

Setting the fan

Switching on

Touch the

symbol.

The fan starts at fan setting 2.

Selecting the fan setting

Touch symbol 1, 2 or 3 to set a different fan setting.

Switching off

Touch the

symbol.

Intensive setting

You can use the intensive setting if there is a large

build-up of odours and fumes/vapours.

Switching on

Touch the

symbol.

Note:

After approx. 6 minutes, the extractor hood

automatically switches back to fan setting 3.

Switching off

If you want to end intensive mode before the preset

time expires, touch the symbol for the required fan

setting.

Lighting

The lighting can be switched on and off independently

of the fan.

Touch the

symbol.

2Cleaning and maintenance

Warning – Risk of burns!

C l e a n i n g a n d m a i n t e n a n c e

The appliance becomes hot during operation. Allow the

appliance to cool down before cleaning.

Warning

Risk of electric shock!

Penetrating moisture may result in an electric shock.

■

Clean the appliance using a damp cloth only. Before

cleaning, pull out the mains plug or switch off the

circuit breaker in the fuse box.

Do not use any high-pressure cleaners or steam

Risk of electric shock!

■

cleaners, which can result in an electric shock.

Warning – Risk of injury!

Components inside the appliance may have sharp

edges. Wear protective gloves.

Caution!

There is a risk of surface damage if you do not peel off

the protective film.Remove the protective film from all

parts of the appliance before using the appliance for the

first time.

Cleaning agents

To ensure that the different surfaces are not damaged

by using the wrong cleaning product, follow the

instructions in the table. Do not use any of the following:

Harsh or abrasive cleaning agents, e.g. scouring

■

powder or liquid scouring cleaner,

Cleaning products with a high alcohol content,

■

Hard scouring pads or cleaning sponges,

■

Pressure washers or steam cleaners,

■

Cleaning products that dissolve limescale,

■

Aggressive all-purpose cleaning products,

■

Oven spray.

■

Note:

Wash new sponge cloths thoroughly before use.

Note:

Follow all instructions and warnings included with

the cleaning products.

Area

Cleaning products

Stainless steel

Hot soapy water:

Clean with a dish cloth and then dry with a

soft cloth.

Clean stainless steel surfaces in the direction

of the grain only.

Special stainless steel cleaning products are

available from our after-sales service or from

specialist retailers.Apply a very thin layer of

the cleaning product with a soft cloth.

Painted surfaces

Hot soapy water:

Clean using a damp dish cloth and then dry

with a soft cloth.

Do not use stainless steel cleaner.

Aluminium and plastic Hot soapy water:

Clean with a soft cloth.

Operating the appliance