Bosch 8 Series User Manual And Installation Instructions - Page 14

Print Page

Bosch 8 Series User Manual And Installation Instructions

en Rapid heating

9 Rapid heating

To save time, you can shorten the preheating time for

set temperatures of 100 °C and higher.

You can use rapid heating for the following types of

heating:

¡ 4D hot air

⁠

¡ Top/bottom heating

9.1 Setting rapid heating

To ensure an even cooking result, do not place the

food in the cooking compartment until rapid heating

has come to an end.

Note: Do not set a cooking time until rapid heating has

come to an end.

10 Time-setting options

Your appliance has different time-setting options, with

which you can control its operation.

10.1 Overview of the time-setting options

You can set a cooking time and end time for the opera-

tion. The timer can be set independently of the appli-

ance when it is in operation.

Time-setting

Use

option

Timer ⁠

The timer can be set independently

of the appliance when it is in opera-

tion. It does not affect the appliance.

Cooking time

If you set a cooking time for the op-

⁠

eration, operation of the appliance

stops automatically once this time

has elapsed.

End

⁠

For the cooking time, you can set the

time at which operation ends. The

appliance starts up automatically so

that it finishes cooking at the re-

quired time.

10.2 Setting the timer

The timer runs independently of the appliance when it

is in operation. The timer can be set when the appli-

ance is switched on or off, up to 23 hours and 59

minutes. The timer has its own audible signal so that

you can tell whether it is the timer or a cooking time

which has elapsed.

Press ⁠ .

a The symbol lights up red.

Use the control ring to set the timer duration.

Press ⁠ to start the timer.

The timer starts automatically after a few seconds.

a The timer counts down.

a When the appliance is switched off, you will still be

able to see the timer counting down in the display.

a When the appliance is switched on, the display

shows the settings for the current operation. To dis-

play the timer for a few seconds, press ⁠ .

⁠

Set a suitable type of heating and a temperature of

at least 100 °C.

Press "Rapid heating".

a The text field shows "On".

Press ⁠ to start.

a Rapid heating starts.

a When rapid heating has come to an end, an audible

signal sounds. The text field shows "Off".

Place the food in the cooking compartment.

Cancelling rapid heating

Press "Rapid heating".

▶

a The text field shows "Off".

a An audible signal sounds once the timer duration

has elapsed. The red symbol goes out.

Once the timer duration has elapsed:

To stop the signal early, press any touch field.

‒

To set another timer, press ⁠ and use the control

‒

ring to set the time.

Changing the timer

You can change the timer duration at any time.

Press ⁠ .

Use the control ring to change the duration of the

timer.

Press ⁠ to confirm.

Cancelling the timer

You can cancel the timer duration at any time.

Press ⁠ .

Use the control ring to reset the duration of the

timer to zero.

Press ⁠ to confirm.

a The red symbol goes out.

10.3 Setting the cooking time

You can set a cooking time for operation of up to 23

hours 59 minutes.

Requirement: An operating mode and temperature or

setting have been set.

Press "Cooking time".

Use the control ring to set the cooking time.

Direction of rotation

Left

Right

The cooking time can be set in one-minute incre-

ments up to one hour, and then in five-minute incre-

ments. The end time is calculated automatically.

Press ⁠ to start.

a The appliance starts to heat and the cooking time

counts down.

a When the time has elapsed, a signal sounds. The

time shown in the display is zero.

When the cooking time has elapsed:

Default value

10 minutes

30 minutes