Airtech Information & Communication Co., Ltd. AT-200 User Manual - Page 2

Browse online or download pdf User Manual for Radio Airtech Information & Communication Co., Ltd. AT-200. Airtech Information & Communication Co., Ltd. AT-200 8 pages. Land mobile radio (lmr)

Unpacking

Unpack and check that all items have been enclosed.
Packing contents:
radio antenna battery pack (1,350
mAH)
belt clip
hand strap

Optional Accessories

1. External earphone & MIC. (APE–10)
2. Additional battery pack (720 mAH, HM–720)
charger
user's manual

Getting Ready

1.
Installation, Removal Belt Clip
Installation: align the belt clip with
the plastic slots of the battery pack.
Slide the belt clip onto the battery
pack, pushing firmly until a click
heard.
Removal: hold up the belt clip
release tab with a fingernail or a
coin (or like instrument). While
holding up the release tab, slide the belt clip out and
away from the battery pack.
2.
Installation, Removal Battery Pack
Installation: turn off the transceiver. Hold the transceiver
with the back of the unit facing up.
Place the battery pack against the
back of the transceiver so that the
tabs on the transceiver engage the
four openings in the battery pack.
Slide the battery pack toward the
top of the transceiver until a click
heard.
Removal: turn off the transceiver.
Hold the radio with the back of the unit facing up. With
the thumbnail of your other hand slide the latch lever
down. While holding the latch lever down, slide the
battery pack down toward the bottom of the transceiver.
Separate the battery pack from the transceiver.
3.
Installation Antenna
Rotate the antenna clockwise until
it is seated firmly.
*. Before your starting operation, make
sure the battery is fully charged.

Description