Bosch BBHMOVE4 Instructions For Use Manual - Page 9

Browse online or download pdf Instructions For Use Manual for Vacuum Cleaner Bosch BBHMOVE4. Bosch BBHMOVE4 39 pages.

Print Page

Figure

Raise the handle and lock into place

To fold the handle back down, press the unlocking

knob and release the handle catch.

Figure

Plug the handstick vacuum cleaner into the floor tool

and lock into place.

To release the floor tool, press the unlocking knob

and pull the handstick vacuum cleaner out of the

tool.

Figure

Insert the handheld vacuum cleaner into the

handstick vacuum cleaner as shown and lock into

place.

Make sure that the contacts of the handheld

vacuum cleaner and handstick vacuum cleaner are

not dirty. Clean the contacts if necessary.

Figure

Insert the handstick vacuum cleaner into the charger

as shown.

Make sure that the contacts of the handstick

vacuum cleaner and charger are not dirty. Clean the

contacts if necessary.

When the handstick vacuum cleaner is inserted into

the charger, the appliance is automatically switched

off, should it have still been left on by mistake.

Before using the appliance for the first time, the

vacuum cleaner batteries must be charged for at

least 16 hours.

Plug the charger plug into the socket.

The charging indicator lights up.

The indicator remains lit for as long as the vacuum

cleaner is connected to the mains via the charger.

It does not go out even when the vacuum cleaner

batteries are fully charged.

It is normal for the charger and vacuum cleaner to

become hot and not a cause for concern.

You can charge the vacuum cleaner at any time when

it is not in use. In this way, it is always ready for use.

Vacuuming

Using the handstick vacuum cleaner

Figure

Remove the appliance from the charger and operate the

on/off switch in the direction of the arrow.

The function indicator on the floor tool lights up,

indicating that the brush roller is turning.

For models BBHMOVE4, BBHMOVE5 and BBHMOVE6

The on/off switch can be moved to the following two

positions:

Position 1 = medium power setting

=> The appliance has a longer run time.

Position 2 = high power setting

=> The appliance has more power for a shorter run

time.

Figure

During short pauses in vacuuming, the appliance can

be left standing upright anywhere in the room. To do

this, tilt the vacuum cleaner forwards slightly in the

direction of the nozzle.

Caution: When the appliance is left standing,

it must be switched off, because if the brush is

turning while the appliance is standing still, it

could cause damage to the floor covering.

Figure

After vacuuming, switch the appliance off and return

it to the charger.

Caution!

Floor tools are subject to a certain amount of wear,

depending on the type of hard floors you have

(e.g. rough, rustic tiles). Therefore, you must check

the underside of the floor tool at regular intervals.

Worn undersides of floor tools may have sharp edges

that can damage sensitive hard floors, such as parquet

or linoleum. The manufacturer does not accept any

responsibility for damage caused by worn floor tools.

Using the handheld vacuum cleaner

Figure

Unlock the handheld vacuum cleaner by pressing the

unlocking knob and remove it from the handstick

vacuum cleaner.

Crevice nozzle

Figure

For vacuuming crevices and corners, etc.

Insert the crevice nozzle into the air intake opening

of the handheld vacuum cleaner, as illustrated.