Alere Pima User Manual - Page 7

Browse online or download pdf User Manual for Printer Alere Pima. Alere Pima 12 pages.

Print Page

2 Operation

All printing processes are controlled by the Pima Analyser.

Connect the Pima Printer by inserting the USB plug of the printer

cable into one of the two USB ports located at the back of the Pima

Analyser. Start the Pima Analyser and the Analyser will automatically

detect the Pima Printer.

If the Pima Analyser does not automatically recognise the Pima

Printer, disconnect the printer from the USB port and reconnect

it with the Analyser. Should the Analyser still not recognize the

Pima Printer shut down the Pima Analyser and restart with the

Pima Printer attached.

The status light on the right side of the FEED key indicates

functionality of the Pima Printer. The light may be flashing or

constantly illuminated. When the printer is disconnected from the

Pima Analyser, the status light will cease to be illuminated after a

short while.

•

Green light: the printer is fully functional and ready to print

(when connected to the Pima Analyser)

•

Orange light: the printer battery is low (recharge the Pima

Printer via the Pima Analyser)

•

Red light: the printer is not ready to print (in general this occurs

when the printer is out of paper; if the condition persists despite

replacement of printer paper, please contact your local distributor).

Pima Printer User Guide