Atlas Strategy III Series Install Sheet - Page 2
Browse online or download pdf Install Sheet for Speakers Atlas Strategy III Series. Atlas Strategy III Series 2 pages.
Print Page*DO NOT USE 8Ω / 6Ω SETTING WITH 70.7V / 100V SYSTEMS!
*DO NOT OVERPOWER IN 8Ω CONFIGURATION!
AMPLIFIER OUTPUT SHOULD NOT EXCEED 25 W RMS @ 6Ω PER SPEAKER.
Frequency Response: 400 - 4kHz (Fire Signaling), 100 - 10kHz (General Signaling)
Recommended Cable Type: Solid / Stranded Copper AWG 18 - 12 (or equivalent)
Tile / Drywall Cutout Circle: 7-
/
"
5
8
Paint Shield Cutout Circle: 7"
Removing speaker from ceiling:
1.
While holding the speaker in place; pull down the "T-Handle" and turn to reveal the small hole adjacent to the locking slot.
2. Insert the provided release tool into the hole and move the tool back and forth until you can hear the dog leg release.
3. Repeat steps 1 and 2 for the 2 remaining doglegs
Note:
UL recognized conduit clamp must be used for conduit connections.
Cable connection cavity is not intended to be used as a junction box.
Not intended for use in DC Supervisory systems.
Typical wiring method shall be in accordance with the applicable section of the National Electrical Code, ANSI/NFPA 70 or ANSI/NFPA 72
and CSA C22.1, Canadian Electrical Code, Part I, Safety Standard for Electrical Installations.
Changing factory finish is not recommended in Fire Signaling applications.
Voltage
Auxiliary Suspension Point
Power Tap (W)
(Vrms)
2
Dogleg In Normal Position
Tile Bridge
4
70.7
8
Ceiling Material up to 1-1/2"
16
4
100
8
16
6Ω Direct Input
Typical Parallel Hookup of Full Range 70.7V/100V Speakers
Amplifier
Typical 120 Watt 70.7V Output
Tap Power Total: 60 Watts
Input
1
2
3
4
5
6
master
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
OSPL (dBA) at 10 ft
Auxiliary Suspension Point
UL1480
ULC-S541
Reverberant
Anechoic
83.2
80.9
Dogleg In Inverted Position
Tile Bridge
85.8
82.9
88.2
85.7
Ceiling Material up to 2"
90.0
87 .0
85.8
83.6
88.2
86.4
90.2
87 .5
88.8
90.6
power
power
+
–
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
Horizontal and Vertical
Dispersion Characteristics
Axis Angle
0
± 30 °
± 60 °
± 90 °
Auxiliary Suspension Point
Dogleg In Normal Position
Ceiling Material up to 1-1/2"
+
–
+
–
Typical Parallel Hookup of Full Range 70.7V/100V Speakers
Amplifier
Typical 120 Watt 70.7V Output
Tap Power Total: 60 Watts
FAP33T
FAP33T
Full Range
Full Range
16W @ 70.7V
16W @ 70.7V
Input
1
2
3
dBA
0
-3
FAP33T
-6
Full Range
16W @ 70.7V
-9.4
Auxiliary Suspension Point
Tile Bridge
Dogleg In Inverted Position
Ceiling Material up to 2"
+
–
+
–
FAP33T
FAP33T
Full Range
Full Range
16W @ 70.7V
16W @ 70.7V
4
5
6
master
power
power
AtlasSound.com
+
2/2
Tile Bridge
+
–
–