Atlas DPA-102PM Owner's Manual - Page 18
Browse online or download pdf Owner's Manual for Amplifier Atlas DPA-102PM. Atlas DPA-102PM 20 pages. Networkable 2-channel power amplifier with dsp
Print Page
DPA-102PM - Networkable 2-Channel
Power Amplifier with DSP
Identifying the Firmware Version
1. About Page – Features enhancements or bugs may be
required to update the firmware on the amp.
The About page contains information such as the MAC
address and firmware versions. There are 3 types of
firmware that may need upgrading, host firmware, DSP
firmware, and web page firmware. Illustrated in Figure
10.
Visit www.atlassound.com/dpa, choose the DPA model
being updated, and click the "downloads" button on
the right side of the page. Click the "About" page in
the Control Panel and it will list the firmware versions
installed on the amplifier. Compare these to the firmware
versions available for download on the Atlas website.
If they do match, download the firmware versions that
need to be updated. Read the DPA Amplifier Firmware
Update Guide for instructions on how to install the
firmware updates.
2. Update Page – As features and updates are created it
may be required to update the firmware on the amp. This
page provides directions on how to perform a firmware
update as shown in Figure 11.
For a more detailed description on firmware upgrades
visit www.atlassound.com/dpa to download the DPA
amplifier upgrade Reference Guide and up-to-date
firmware files.
Resetting the DPA to Factory DHCP
Enabled
1. Remove AC Power from DPA amp and wait 1 minute
2. Apply AC while at the same time press and hold the front
power button until the LED blinks 5 times at which point
it will be reset.
Note: typically the button must be held for about 10
seconds.
3. DHCP will be enabled
4. Follow standard login procedures
AtlasSound.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 18 –
Specifications are subject to change without notice.
Owner's Manual
Figure 10
Figure 11