Atlas FM250-4 Owner's Manual - Page 3

Browse online or download pdf Owner's Manual for Amplifier Atlas FM250-4. Atlas FM250-4 3 pages. Multi-impedance modular amplifier

Print Page
Atlas FM250-4 Owner's Manual
Owner's Manual
FM250 Amplifier Module Installation
Use the following steps and read all steps prior to installation.
1.
Turn F6-MF AC Power Switch to the "Off" position.
2. Turn down all level controls on the front panel.
3. Remove the blank card slot cover. Do not discard the two screws, you will need them later.
4. Set the function switches on the FM250 module. (See Page 10)
5. Carefully and slowly guide the module into the slot with the PCB components facing to the right. Note: The module heatsink
top and bottom metal edge mate with the mainframe plastic card guides. Do not force the card. Realign if necessary.
6. After the module is pushed in and in contact with the back plane of the PCB assembly mating connector, firmly press the
module in completing the connection. If the module plate is flush to the F6-MF , the module is fully seated.
7 .
Insert the two screws from the cover pate. Some minor alignment may be required.
Multi-Impedance Modular Amplifier
Align Modules to
Top & Bottom Card
Guides
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 11 –
Specifications are subject to change without notice.
F6-MF
AtlasSound.com