Atlas MVXA Owner's Manual - Page 3
Browse online or download pdf Owner's Manual for Amplifier Atlas MVXA. Atlas MVXA 8 pages. Multi-channel amplified monitor panel
![Atlas MVXA Owner's Manual](/uploads/products/server2/1466053/1466053.jpg)
MVXA SERIES
MULTI-AMPLIFIED MONITOR PANEL
MVXA Series Fast Install Overview
1. Remove Rear Panel Cover and set jumpers for each input to desired reference level
(25V, 70V, 100V, or line level).
Set Each Channel's
0dB Reference Level
Jumper Setting
Reference Voltage
Power Ref. into 8Ω
Power Ref. into 4Ω
Each channel is independent so that signals of different types can be monitored on the same unit.
2. Rack mount (if desired).
Assure proper "Earth Ground"- see paragraph Shields and Grounding located in Back Panel View on page 6 for
detailed information.
3. Connect each piece of equipment to be monitored to a separate + & — input terminal (channel 1-8 or 1-16).
4. Determine desired audio monitoring method and action.
METHOD
A. Internal Speaker
B. Headphone Jack
C. External Speaker
D. External Line Level Connect line level source to + and – line level out terminals. If listening to both the
5. Perform desired wire management and labeling functions.
6. Connect the power supply (included) to the MVXA.
7. Attach rear cover.
8. Plug the power supply into a 110/120 VAC outlet.
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •
©2006 ATLAS SOUND LP
1 2
3 4
25V
70V (Default Setting)
1 & 2
3 & 4
25Vrms
70 Vrms
78 Watts
613 Watts
156 Watts
1225 Watts
ACTION
No Action Required.
Plug in headphone. This automatically bypasses the internal speaker.
Connect external speaker to + and – speaker out terminals. If listening to both internal
and external speakers is desired; keep the speaker/headphone disconnect jumper in the
"on" position. If only the external speaker is desired; move the speaker/headphone
disconnect jumper to "off".
internal speaker and line level device is desired; keep the speaker/headphone
disconnect jumper in the "on" position. If only the line level device is desired, move the
speaker/headphone disconnect jumper to "off".
Specifications are subject to change without notice
AtlasSound.com
Printed in China
OWNER'S MANUAL
N o n e
4 5
100V
Line Level
None
4 & 5
100Vrms
1Vrms
1250 Watts
0.13 Watts
2500 Watts
0.25 Watts
TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
00606
AT000384 RevB 06/06
WARNING!
Place jumpers
lengthwise only
as shown in these
diagrams!
Jumpers must be
adjusted before
applying power!
PN 484004
3