Atlas FAP62T Specifications
Browse online or download pdf Specifications for Speaker System Atlas FAP62T. Atlas FAP62T 4 pages. Strategyseries ii
Also for Atlas FAP62T: Brochure (5 pages), Manual (5 pages), Installation Instructions (1 pages)
Print Page
Strategy Series
Specifications
Power Rating
Transformer Taps
Frequency Response
Sensitivity (1W / 1M)
Woofer
Woofer Magnet Weight
HF Driver
Diameter
Overall Height
Enclosure Volume
Cut-out Dimensions
Features
• E xtended Low Frequency Response from the 475 in
and Ported Deep Drawn Galvanized Steel Enclosure
• E asy Installation in Drop Tile or Sheetrock Ceilings Via C-Ring/V-Rail
Tile Bridge and "Dog Leg" Mounting System (Included)
• F ront Mounted Tap Selector Switch for Easy System Tuning
Adjustments Include Transformer Bypass Setting for 8Ω Direct
Coupled Operation
• U nique "Trap Door" Input Section Allows for Through Conduit Runs
with Rigid or Flex Conduit
• 4 Pole Detachable "Phoenix" Style Connector Allows Easy Pre-Wiring
and Is Convenient for Daisy Chaining Additional Strategy Series Full
Range Speakers or Subwoofers
• " Press Fit" Grilles Blend Better into Contemporary Architecture
• E nhanced Quality 70.7V / 100V Internal Transformers Minimize
Insertion Loss and Maintain Low Frequency Response While
Providing Increased Output for Higher SPL Applications
• U L Listed 1480
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
FAP62T
II In-Ceiling 6" Coaxial Speaker System
®
FAP62T
50 Watts
2, 4, 8, 16, & 32 Watts
63Hz – 20kHz (±7dB)
88dB
6" Poly Cone Butyl Rubber Surround
14 oz (398g)
19mm Coaxially Mounted PEI Dome Tweeter
12
⁄
" (318mm)
1
2
8.48" (215mm)
475 in
3
11" (279mm)
Optimally Tuned
3
Applications
Atlas Sound's FAP62T combines superior coaxial loudspeaker perfor-
mance with even dispersion and easy installation. A low profile enclosure
and wide coverage make the FAP62T a perfect choice for low ceilings.
The FAP62T will satisfy the needs of owners, architects, contractors,
and consultants by delivering true, high fidelity sound reproduction
in an attractive and easy-to-install system. The FAP62T is ideal for
high-intelligibility voice, music, and signal reproduction in commercial,
industrial, and institutional applications.
General Description
The FAP62T's 110° dispersion angle can reduce the number of
l oudspeakers necessary to achieve coverage in distributed systems with
low ceilings.
The loudspeaker component matches the performance of the legen dary
Atlas Sound FA136 driver. High quality construction 6" coaxial cone type
driver includes a 1" voice coil and polypropylene cone with a butyl rubber
surround. The 19mm coaxially mounted tweeter is constructed of PEI. A
high sensitivity of 88dB average (92dB peak) means less power may be
required to achieve the desired SPL. This loudspeaker is factory assem-
bled in an optimally tuned and ported deep drawn enclosure and includes
a specially designed 32 watt low saturation 70.7V / 100V transformer.
A convenient front mounted selector switch allows tap selection with-
out the need to remove the speaker from the ceiling. This switch also
includes a transformer bypass setting for 8Ω direct coupled operation.
AtlasSound.com
1/4