Bosch Series 4 Instruction Manual - Page 29

Browse online or download pdf Instruction Manual for Vacuum Cleaner Bosch Series 4. Bosch Series 4 48 pages. Free standing cooker
Also for Bosch Series 4: Instruction Manual (24 pages), Instruction Manual (44 pages), Instructions For Installation And Use Manual (16 pages), Instructions For Installation And Use Manual (16 pages), Instruction Manual (16 pages), Instruction Manual (24 pages), Instruction Manual (10 pages), Instruction Manual (12 pages), Instruction Manual (20 pages), Instruction Manual (32 pages), Installation Instructions Manual (12 pages), Manual (2 pages), Quick Reference Manual (2 pages), User Manual (16 pages), Instruction Manual (50 pages), Information For Use (24 pages), Information For Use (32 pages), Information For Use (32 pages), User Manual (32 pages), Information For Use (32 pages), Instruction Manual (24 pages), Instructions For Use Manual (27 pages), User Manual And Installation Instructions (40 pages), Information For Use (32 pages), Instruction Manual (36 pages), User Manual (24 pages), Instructions For Use Manual (47 pages), User Manual And Installation Instructions (28 pages)

Print Page
Bosch Series 4 Instruction Manual

Switching off the appliance

Shortly after the end of the
programme:
Switch off ON/OFF switch (.
1.
Turn off water supply (does not
2.
apply to appliances with Aqua-Stop).
Remove the utensils when they have
3.
cooled down.
When the programme ends,
Note:
leave the appliance to cool down a
while before opening it. This will prevent
steam from escaping and causing
long-term damage to your built-in
furniture.

Interrupting the programme

Caution!
Expansion (overpressure) may cause
the appliance door to jump open and/or
water to escape! If the door was opened
on an appliance which has a hot water
connection or is heated, always leave
the door ajar for several minutes and
then close it.
Switch off ON/OFF switch (.
1.
The LEDs go out. The programme is
saved.
Switch on the ON/OFF switch (
2.
again to continue the programme.

Terminating the programme

(Reset)
Press the START button P and
1 .
T e r m i n a t i n g t h e p r o g r a m m e
hold it down for about 3 seconds.
The value ‹:‹‚ appears in the
display window )". The
programme sequence lasts about
1 minute. The value ‹:‹‹ appears in
the display window )".
Switch off ON/OFF switch (.
2.
Operating the appliance en

Changing the programme

When the START button P has been
pressed, the programme cannot be
changed. The only way a programme
can be changed is by Cancel
programme (Reset).

ExtraDry

The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Be careful if you have delicate
tableware)
Here's how to change the setting:
Switch on ON/OFF switch (.
1.
Hold down the programme button
2.
# and then repeatedly press the
START button P until •:‹...
appears in the display window )".
Release both buttons.
3.
The LED of the # button flashes
and the digital display )" shows
the factory setting •:‹....
Press the programme button #
4.
repeatedly until the factory setting
value š:‹‹ appears in the display
window )".
By pressing the 3 button you can
5.
switch intensive drying on š:‹‚ or
off š:‹‹.
Press START button P.
6.
The set value is saved.
29