Atlas Copco 8432084561 Product Instructions - Page 10

Browse online or download pdf Product Instructions for Power Tool Atlas Copco 8432084561. Atlas Copco 8432084561 16 pages. Handheld transducerized

Print Page

Operation

Configuration Instructions

To start the tightening process, press the start lever (A). By default, you need to hold the lever during the

whole tightening process.

For other start modes, refer to Start options [Page 11].

The front light will turn red if the tightening is fault.

There are two unscrew modes:

■

Standard (default): run the tool in CCW.

■

Single reverse: run the tool in CCW once and shift back in CW when tightening is ready.

To start the unscrew process:

Press the function button (B) once. The reverse light (C) is on.

If the reverse light (C) is flashing, single reverse mode is selected.

press the start lever (A).

ETD MT41-100-I06