Alert 750R-LCD Owner's Manual - Page 12

Browse online or download pdf Owner's Manual for Car Alarm Alert 750R-LCD. Alert 750R-LCD 15 pages. Remote starter and security system

Print Page

1. Transmitter Operation

ARm

Armed mode

Your vehicle is in armed mode

remote Transmission

You are transmitting the signal to

control unit

door Open Warning

Doors are illegally opened (zone )

Shock Sensor Trigger

Trigger on Shock Sensor (zone 4)

Engine Starting

Your vehicle wngine starting by

remote control

Timer Control Start

Engine will start automatically at

the same time next day or every

/-hour.

Activate Channel 3

(Trunk Release).

Activate Channel 5

Time monitor

Count down (parking) Timer

Reminder when time is up for

parking

driver paging

Someone is paging you in front of

your vehicle

Valet mode

All the function shall be temporar-

ily on hold

In - range Indicator

Your are within the remote control

range.

Trunk/Hood Trigger

Trunk or Hood is illegally opened

(zone )

Warn Away Trigger

Trigger on Shock Sensor (zone )

Engine running

Your vehicle's engine is running

Temperature monitor

Indoor temperature for your

vehicle

Activate Channel 4

Activate Channel 6

Alert Alarm

You have set morning call alarm

Vibration mode

Remote Control vibrates when the

system is triggered

Low Battery

You have to replace the battery of

remote control.

C. PRoGRAmmING oF tHe LCD Remote tRANSmItteR:

Transmitter Button

Description

F ( second)

LCD screen lamp turns on for

5 seconds

F ( seconds)

Timer Programming Mode

F - F - F

Clear the Flashing Icon and

Melody Sound on the LCD

Screen Transmitter

F - (-second)

Melody / Vibration (

F -

(-second)

Program Count Down (Parking)

Timer (0-Minute / 0M / 0

M /Hour /.5H / .0H)

1. Screen Lamp ON: Press and hold the F button one second, with one melody sound and the

LCD screen lamp will turns on for 5 seconds

2. Clear the Flash Icon and melody Sound: Press the F button times within seconds will

clear the flash icon and melody sound on the LCD screen transceiver

3. Stop The Trigger melody Sound: While triggering the alarm the LCD screen will alert user

through melody sound and flashing trigger icon, press any button on the LCD remote transmit-

ter to stop melody sound only.

4. Vibration / melody mode: It is useful when you are in a noisy place and

difficult to hear beep sound from the remote control as the remote control in

this mode, vibrates itself if your security system is triggered.

Press the F button first, within seconds press and hold the button for

seconds to select the mode of vibration or melody, the

on the LCD screen to show the LCD remote transceiver is on vibration mode.

5. Low Battery Indication: When the power of the battery weakens, it has two short " beep"

sound and flash

icon while pressing the button of the LCD screen transceiver.

6. Set Up Fixed Count down (parking) Timer:

. Press the F button first, within seconds press and hold the

LCD screen will shows icon and timer (ie. 0:0) ,

Operation

Press and hold for second

melody sound to confirm enters

Press and hold for seconds -

melody sounds to confirm enter

Press within seconds

) Mode Press within seconds

Press within seconds to cycle

*leave the buttons starting count

down then

flashes

icon will displayed

button for seconds, the