Bose 701 Series II Speaker Owner's Manual - Page 7
Browse online or download pdf Owner's Manual for Speakers Bose 701 Series II Speaker. Bose 701 Series II Speaker 12 pages. Direct/reflecting speakers
Print Page
Making the connections (cont.)
Figure 5
Wiring schematic
Figure 6
Connecting the right acces-
sory speaker to the left
main speaker
AM257817_00_V.pdf
Receiver
Press down the terminal tab on the bottom of the left main speaker to insert the appropriate
wire (Figure 5).
1. Connect one cord to the left speaker output of your receiver or amplifier.
A. Insert the marked wire at one end to the red (+) terminal.
B. Insert the plain wire at that end to the black (–) terminal.
2. Connect the other end of the cord to the left (L) main speaker terminals (Figure 5).
A. Insert the marked wire into the red (+) terminal.
B. Insert the plain wire into the black (–) terminal.
3. Repeat steps 1 and 2 for the right (R) speaker connections.
Note: The right speaker outputs are located on the left main speaker directly below the left
speaker outputs. They are labeled with an R.
Connecting the right accessory speaker to the left main speaker
Use the supplied Bose
®
interconnect cable to make this connection. It is important to note the
connector at each end is designed to be inserted in one orientation only. Match the curved
top of the connector to the curved top of the jack on the rear connector cups.
CAUTION: Never connect the right accessory speaker directly to a receiver output. Always
connect the right accessory speaker to the left main speaker, then connect the left main
speaker to the receiver.
Input
October 25, 2001
L
R
er
L
Power
125/115C
225W
R
Power
Right accessory speaker
Setting Up
L
R
LFE/
Output
Input
Subwoofer
L
R
Output
LFE/
Input
Subwoofer
Left main speaker
Output
Inpu
L
R
Power
LFE/
125/115C
Output
Input
Subwoofer
225W
Left main speaker
7