Bose FreeSpace DS 40SE Technical Data Sheet - Page 6

Browse online or download pdf Technical Data Sheet for Speakers Bose FreeSpace DS 40SE. Bose FreeSpace DS 40SE 8 pages. With ceiling mount bracket
Also for Bose FreeSpace DS 40SE: Owner's Manual (32 pages), Owner's Manual (20 pages), Installation Manual (22 pages), Installation Manual (35 pages)

Print Page

1. Replacement Parts

FreeSpace

DS 40SE

Loudspeaker

Engineers' and Architects'

Specifications

Each loudspeaker shall be a 40-watt, ported

loudspeaker system utilizing one 4.5" (114mm)

full-range HVC (Helical Voice Coil) driver. The

loudspeaker shall be used for installation on

walls, ceilings, and other flat, solid surfaces.

Each loudspeaker shall have a nominal rated

impedance of 8 ohms and shall be wired in

parallel with a line voltage matching (step-down)

transformer with an accessible, front-mounted

level selector appropriate for setting various

output taps. The loudspeaker input connections

will allow for direct connection to 70V, 100V or

low-impedance amplifiers.

The loudspeaker shall have a protection circuit

to protect the product from occasionally being

overdriven.

Each loudspeaker shall have a bandwidth of

80 Hz – 16 kHz and a maximum acoustic output

of 103 dB-SPL referenced to a full bandwidth

pink noise input at 1 meter at the loudspeaker's

rated power. The input connection shall consist

of a three-position barrier connector on the

included mounting bracket. Each loudspeaker

shall be wired to the mounting bracket via a

4-pin, pre-wired connector.

Power settings available shall be: 2.5W, 5W,

10W, 20W, 40W @ 70V; 5W, 10W, 20W, 40W

@ 100V; and 40W @ 8Ω (when referenced to

IEC noise for 100 hours). The nominal dispersion

shall be 125° H x 125° V coverage pattern at -6 dB

(average 1 – 4 kHz).

When used with optional junction boxes (wall-

mount bracket variant only), ceramic terminals

and thermal fuse, the loudspeaker shall meet

numerous standards for combination music

and evacuation systems around the world.

Exposed cosmetic surfaces of the loudspeaker

shall be paintable, and the acoustically

transparent grille component shall be formed

of powder-coated steel.

The loudspeaker shall be the Bose

DS 40SE loudspeaker.

p r o . B o s e . c o m

Safety and Regulatory Compliance

The FreeSpace DS 40SE has passed extensive

testing and complies with the following

specifications and uses:

Listed to ANSI/UL 1480-2005

• Fire Protective Signaling Use – UL Category

UUMW, File Number S 3241. Control Number

42S9 when installed with a ceiling-mount

bracket or a wall-mount bracket and junction

box (on-wall or in-wall).

Not for use with DC-supervised systems.

• General-Purpose Use – UL Category UEAY,

File Number S 5591 Control Number 3N89.

• Suitable for use outdoors in wet locations.

• Suitable for installation using Class 1, Class 2

or Class 3 wiring methods in accordance with

NFPA 70, National Electric Code, 2008,

Article 640.

• Suitable for use with fire alarm circuit wiring

methods in accordance with NFPA 70, National

Electric Code, 2008, Article 760.

The DS 40SE loudspeaker has been designed

to the requirements defined in the following

European regulatory specification for

combination systems:

• British Standard Code of Practice BS 5839,

Part 8.

FreeSpace