Bose L1 Model II Manual - Page 7

Browse online or download pdf Manual for Speakers Bose L1 Model II. Bose L1 Model II 15 pages. Portable line array systems
Also for Bose L1 Model II: Owner's Manual (32 pages), Owner's Manual (32 pages), Owner's Manual (28 pages), Technical Data Sheet (8 pages), Technical Data Sheet (8 pages), Application Manual (13 pages)

Print Page

English

Dansk

Deutsch

Español

Dansk

Connecting the B1 bass module

Figure 7

B1 bass module

Français

Deutsch

Italiano

Nederlands

Español

You can place the B1 bass module either vertically or horizontally on the floor. It fits neatly

bewteen the legs of the power stand.

1. Plug one end of the B1 bass module cable into one of the B1 connectors. Rotate the plug

clockwise to lock it in place. You should hear a soft click as it locks.

2. Plug the other end of the cable into the Bass Module Out connector on the power

stand. Rotate the plug clockwise to lock it.

Note: To disconnect a B1 cable, slide back the metal tab on the body of the plug, rotate the plug

counterclockwise, and pull it out of the connector.

B1 bass

module

cable

CAUTIONS:

• DO NOT connect a B1 bass module to two power stands at the same time.

• DO NOT connect any bass module other than the B1 to the power stand.

• DO NOT substitute the supplied cable with a 2-wire speaker cable. Use only the supplied

B1 bass module 4-wire cable to connect the B1 bass module to the power stand. The

power stand uses the signals on two of the wires to automatically sense how many B1

bass modules are connected.

Français

Svenska

Italiano

Bass Module Out

Nederlands

Svenska

YSTEM

ETUP