Bose MediaMate Computer Speakers Owner's Manual - Page 8
Browse online or download pdf Owner's Manual for Speakers Bose MediaMate Computer Speakers. Bose MediaMate Computer Speakers 17 pages. Mediamate computer speakers
Also for Bose MediaMate Computer Speakers: Owner's Manual (16 pages)
Print Page
- 1. Table of Contents
- 2. Before You Begin
- 3. Unpack the Speakers
- 4. Where to Put Your Mediamate" Speakers
- 5. Connect the Speakers
- 6. How to Connect to the Sound Source
- 7. How to Connect the Power Pack
- 8. How to Use the MIX Control
- 9. When to Use the Headphone Jack
- 10. Troubleshooting
- 11. Warranty Period
- 12. Technical Information
1. Connect one end of the audio input cable to AUDIO INPUTS A.
2. Connect the other end to your computer's AUDIO OUTPUT jack.
We recommend using LINE OUT if your computer sound card
offers more than one option.
3. To connect a separate CD-ROM, or another source, repeat
steps 1 and 2 using AUDIO INPUTS B.
ifow
to connect
the power
pack
You must connect the AC power pack to operate the speakers.
1. Plug its cable end into the power jack on the powered speaker.
2. Plug the power pack blades into the wall outlet.
3. Turn on your computer sound source or external sound source.
Powered
speaker
Source A
computer
Figure
4
Complete,connections
Accessory
speaker
*,I\
B
Source B
external
ifow
to use the volume
control
Your computer hardware may have an external volume control. In
addition, the computer's operating software and some other soft-
ware you use may provide on-screen controls for the volume.
Decide which controls you prefer to use to adjust the volume while
you listen. Then follow the proper instructions on page 9 for setting
the controls you will not use.
8
Connect one end of the audio input cable to AUDIO INPUTS
A.
Connect the other end to your computer's AUDIO OUTPUT jack.
We recommend using LINE OUT if your computer sound card
offers more than one option.
3. To connect a separate CD-ROM, or another source, repeat
steps
1
and
2
using AUDIO INPUTS
B.
How to connect the power pack
You must connect the AC power pack to operate the speakers.
1.
Plug its cable end into the power jack on the powered speaker.
2.
Plug the power pack blades into the wall outlet.
3.
Turn on your computer sound source or external sound source.
Source A
computer
~
-~~v
~--~=~
=---=
= = - - ~
= = - - - =
= = ~ - -
--=--
---~==
Figure 4
Complete,connections
Powered
speaker
Accessory
speaker
J
To powered
speaker
Source B
external
CD-ROM
)1000000
OQQQQI~
To audio inputs B
~
To wall
outlet
To audio inputs A
How to use the volume control
Your computer hardware may have an external volume control. In
addition, the computer's operating software and some other soft-
ware you use may provide on-screen controls for the volume.
Decide which controls you prefer to use to adjust the volume while
you listen. Then follow the proper instructions on page 9 for setting
the controls you will not use.
8