Atlas Copco PHE 6 H Repair Instructions - Page 6

Browse online or download pdf Repair Instructions for Drill Atlas Copco PHE 6 H. Atlas Copco PHE 6 H 18 pages.

Print Page
1
PHE 6 H:
Fix the service tool (4) in a vice (5).
Separating the
2
Insert the driver (2) with the barrel (1) into
driver from the
the service tool (4) and unscrew the driv-
barrel
er (2) from the barrel (1) with aid of an Al-
len key (3).
1
PHE 6 H:
Remove the spring ring (1) and press off
Dismantling the
the ball bearing (2).
spindle sleeve
2
Remove the spring ring (3).
3
Fix the driver (4) in a vice with the anvil up
and knock out the tension ring (A) with aid
of a mandrel.
4
Remove the seal rings (8), the ring (7) and
the rubber ring (6) from the anvil (9).
5
Remove the retainer (5) and the O-ring (C)
from the barrel (B).
1
PHE 6 S:
Remove the disk (7). Loosen the four se-
Dismantling the
cured screws (6).
guide sleeve
2
Lever off the guide sleeve (5) from the ma-
chine. If necessary, hit the housing lightly
with a plastic hammer for support.
3
Remove the washer (4).
4
Remove the spring (3) and the disk (2)
and press out the ring (1).
Repair Instructions No.181.03/98
2
1
1
2
A
7
6
PHE 6 H / PHE 6 S
3
4
5
2
1
3
4
5
6
7
8
9
C
B
1
2
3
5
4
PAGE
5
9
10
11