Bose Solo 10 series II Important Safety Instructions Manual - Page 16
Browse online or download pdf Important Safety Instructions Manual for Speakers Bose Solo 10 series II. Bose Solo 10 series II 20 pages. Tv sound system
Also for Bose Solo 10 series II: Faq (3 pages), Service Manual (40 pages)
Print Page
Alternate Setup
Connecting a source to the system
If you do not get sound from a source, such as a DVD/Blu-ray
Disc
player, cable/satellite box, game system or DVR connected
™
to your TV, connect it to the system.
CAUTION: If using an optical cable, remove the protective caps
from both ends. Inserting the plug in the wrong
orientation can damage the plug and/or the connector.
1.
On the back of your cable/satellite box, locate the Audio Out
(digital) connector panel.
Audio OUT
Source connector
panel
System connector panel
2.
Choose an audio cable.
3.
Connect the audio cable from your cable/satellite box's
Audio Out (digital) connector panel to the system.
Note: Do not disconnect your source's video cable, such as an
HDMI
cable, from your TV.
™
16 - English
Connecting two sources to the system
If you do not get sound from any sources, such as a DVD/Blu-ray
Disc
player, cable/satellite box, game system or DVR, connected
™
to your TV, connect it to the system. Use only one audio cable for
each source.
1.
On the back of each source, locate the AudioOut (digital)
connector panel.
2.
Choose a separate audio cable for each source using either
Option 1 or Option 2 (see page 17).
Note: You MUST use either Option 1 or Option 2. Do not use
the coaxial cable and optical cable at the same time.
3.
Separately connect the chosen audio cable from each source's
Audio Out (digital) connector panel to the system.
Note: Do not disconnect your source's video cable, such as an
HDMI
cable, from your TV.
™
Option1
This figure shows two source connections using an optical cable
and analog cable.
CAUTION: If using an optical cable, remove the protective caps
from both ends. Inserting the plug in the wrong
orientation can damage the plug and/or the connector.
Audio OUT
Source 1
System connector panel
Audio OUT
Source2