Bose L1 Model II Owner's Manual - Page 22
Browse online or download pdf Owner's Manual for Speaker System Bose L1 Model II. Bose L1 Model II 32 pages. Portable line array systems
Also for Bose L1 Model II: Owner's Manual (32 pages), Owner's Manual (28 pages), Technical Data Sheet (8 pages), Technical Data Sheet (8 pages), Application Manual (13 pages), Manual (15 pages)
Svenska
Nederlands
S
S
YSTEM
ETUP
Adding a PackLite
Figure 10
Connecting the A1
amplifier to the power
stand
14
Italiano
Français
Svenska
®
power amplifier model A1 (optional)
Using a PackLite
®
power amplifier model A1 allows you to add one or two additional B1 mod-
ules to your system. Refer to the A1 owner's guide for detailed operating instructions.
1. Make sure the A1 amplifier power switch is OFF.
2. Plug one end of the supplied ¼" TRS cable into the Bass - Line Out connector on the
power stand. Plug the other end into the INPUT connector on the A1 amplifier.
3. Connect a B1 bass module cable from the OUTPUT connector on the A1 to a B1 bass
module. If desired, connect a second B1 to the first B1.
4. Plug one end of the AC power cord into the A1 amplifier and plug the other end into an
AC (mains) outlet.
5. Switch the A1 power switch to ON (I).
Power stand
Bass - Line Out
CAUTION: DO NOT stack more than four
B1 modules in a column.
Nederlands
Español
Français
Deutsch
Italiano
Deutsch
Español
Dansk
English
English
Dansk
®
PackLite
power
amplifier
Additional B1
bass modules