ABSCO SHEDS CPSW50 Assembly & Instruction Manual - Page 7
Browse online or download pdf Assembly & Instruction Manual for Tent ABSCO SHEDS CPSW50. ABSCO SHEDS CPSW50 18 pages. Skillion carport
Print PageSTEP 1.
JOIN THE EDGE BEAMS TOGETHER
WITH THE SPLICE PLATES, USING
M10 x 20 BOLTS, NUTS AND
WASHERS AS SHOWN.
NOTE
ADDITIONAL SPLICE PLATES
ARE ADDED TO THE EDGE BEAMS
AS DESCRIBED ON PAGE 8, STEP 3A.
IT IS EASIER TO INSERT THESE
PLATES BY SLIDING THEM THROUGH
THE END OF THE EDGE BEAMS NOW
PRIOR TO BOLTING THE FRAME
TOGETHER.
STEP 2.
SECURE THE EDGE BEAMS TOGETHER AT EACH
CORNER USING THE JOINER ANGLES AS SHOWN.
THE JOINER ANGLES SHOULD BE POSITIONED
ON THE INSIDE OF THE EDGE BEAMS, HELD WITH
'G' CLAMPS, AND FASTENED WITH TEK SCREWS
FROM THE OUTSIDE OF THE EDGE BEAMS.
SEAL ALL JOINTS WITH SILICONE.
THE EXTERNAL DIMENSIONS OF THIS FRAME
SHOULD MATCH THE CONCRETE SLAB SIZE OF
3000 x 5500 WITH A DIAGONAL MEASUREMENT
OF 6265, AS SHOWN ON THE FRONT PAGE OF
THIS INSTRUCTION.
ABSCO INDUSTRIES
Skillion Carport Model: CPSW50
ASSEMBLY INSTRUCTION MANUAL
Absco Industries
M10 WASHERS
M10 NUT
SPLICE PLATE
CB-2720 & CB-2850 CROSS BEAMS
SHOWN FOR ASSEMBLY PURPOSES
ONLY. DO JOT JOIN OR CONNECT TO
EDGE BEAMS YET
JA-2
JA-1
ALSO FASTEN THE BOTTOM OVERLAP
SECTIONS OF THE EDGE BEAMS WITH
THREE TEK SCREWS.
CARPORT MODEL: CPSW50
M10 x 20 BOLT
CROSS/EDGE BEAM
10-05-2017
PAGE 07