Bose VCS-30 Series II Owner's Manual - Page 13

Browse online or download pdf Owner's Manual for Speaker System Bose VCS-30 Series II. Bose VCS-30 Series II 18 pages. Bose home theater speakers owner's guide
Also for Bose VCS-30 Series II: Owner's Manual (17 pages), Owner's Manual (35 pages)

Print Page

1. Connect the Speakers

How to set your Dolby Digital receiver

If the sound is interrupted

AM257528_01_V.pdf

Adjusting Your Surround Sound Settings

Your VCS-10

or VCS-30

the output from Dolby Digital receivers. Take special care to set

the channel output on the Dolby Digital screen menu to SMALL for

both the center speaker and surround speakers.

Receiver channel output

Center

Left and right surround speakers

(VCS-30 Series II surround speakers)

Follow the receiver owner's guide instructions for using the

receiver test tone to verify your connections and to adjust the vol-

ume levels of the speakers.

The VCS-10 Center Speaker and VCS-30 Series II Center/Sur-

round Speaker System feature an advanced automatic electronic

protection circuit to prevent speaker damage due to an overload.

When the center channel speaker detects an overload, the protec-

tion circuit intermittently shuts down and resets the speaker a

fraction of a second later, until the overload is cleared. Intermittent

play will continue for the duration of the overload.

If you hear this interruption, turn down the volume to relieve the

overload. You will hear the speaker resume normal play when the

volume is set at a safe level.

Note: The overload problem described here should occur only if

the receiver is overdriven and sending a distorted signal, or when

the center speaker is driven by an ampliﬁer rated well above the

100 watts per channel maximum listed in "Compatibility" on

page 15.

October 26, 2001

Series II speakers are compatible with

Proper setting

SMALL