Bose Lifestyle 35 Series II Operating Manual - Page 19

Browse online or download pdf Operating Manual for Headphone Bose Lifestyle 35 Series II. Bose Lifestyle 35 Series II 46 pages. Noise cancelling
Also for Bose Lifestyle 35 Series II: Installation Manual (42 pages), Installation Manual (36 pages), Owner's Manual (25 pages), Owner's Manual (24 pages), Owner's Manual (13 pages), Quick Setup Manual (3 pages), Owner's Manual (36 pages), Owner's Manual (32 pages), Quick Start Manual (2 pages), Factory Reset (2 pages), Quick Start Manual (2 pages), Owner's Manual (38 pages)

Print Page

English

Español

Figure 5

Designating the TV as

channel selector (TV Tuner)

Français

You can control most brands of external components – such as TVs, VCRs, and cable/satel-

lite boxes – using your LIFESTYLE

all of the video components is a way to further simplify your control.

Designating a primary channel selector

By choosing one of your connected components as the primary channel selector, you can

use the remote to control the video source, even when another source is currently selected.

For example, if your TV is the selected source, you can quickly change the CBL/SAT

station you are watching on TV without first switching to CBL/SAT as the source.

Note: For general guidelines on using the LIFESTYLE

you can adjust" on page 25.

Make your selection from the Remote Control options in the System menu. Opposite the

option, select from the components listed the one you want to use as channel selector.

Tuner

Then press System or Exit to leave the menu.

select

navigate

Your LIFESTYLE

system includes an IR (infrared) emitter that sends out signals from the front

of the media center to each component that your LIFESTYLE

allows you to turn on those sources (which are in the room with the media center) and make

basic selections from them. The additional components may be connected either to the

media center or to the TV.

Note: If a component is located where it cannot receive these IR signals, you can use the

supplied IR emitter cable with that component. For tips on getting the IR signals where they need

to go, or using the optional emitter, see "Connecting the optional IR emitter cable" in your Instal-

lation Guide.

It may take more than one try

Some manufacturers use a number of similar device codes. After selecting one code, your

remote may turn your TV, cable or satellite box, or VCR on and off successfully.

However, if you cannot change channels or initiate other features using the remote, you may

want to continue testing device codes until you find one that provides greater control.

ONTROLLING

remote control. Choosing a primary channel selector for

System menu, refer to "Properties that

XTERNAL

OURCES

remote is set to control. This