Advanced Radio Air Safe User Manual - Page 3

Browse online or download pdf User Manual for Recording Equipment Advanced Radio Air Safe. Advanced Radio Air Safe 12 pages. Failsafe gear sequencer

Print Page

Thank you for your purchase of the Advance Radio Air Safe Sequencer .

Air Safe was designed with Giant Scale Models in mind and combines a high quality

200 psi pressure sensor, a fail safe air monitoring system, a 6 channel Gear sequencer

with a built in daylight OLED screen and joystick programming.

In addition, if you are using the Smooth Flite 26 system then you can connect Air Safe to

the Smooth Flite to add fail safe pressure monitoring to the Smooth Flite main Gear se-

quencer.

LETS GET STARTED — in this guide we will show you how to get the most out of the Air

Safe system. Please take the time to read and understand this guide before installation.

Joystick Control— Air Safe comes with a built in daylight OLED

and 5 way joystick.

Joystick ↑ UP Arrow — moves up between menu items.

Joystick ↓ DOWN Arrow — moves down between menu items.

Joystick → RIGHT Arrow — Increases a value.

Joystick ← LEFT Arrow — Decreases a value.

Joystick PRESS — Selects and item or new page.

Joystick PRESS on the word "RETURN" (at the top of the screen)

will return you to a previous

page.

WARNING—Air Safe will power air valves, servos (for gear doors) and linear actuated

electric retracts i.e. retracts that connect with a servo lead. It is not designed to directly

power electric DC motor retracts.

MULTI CHANNEL USAGE—Air Safe offers up to 6 channels of gear and door sequencing.

In most cases with air systems 2 or 3 output channels are all that are required for most

retract setups. However, If you use a large number of output channels to power servos

or linear retracts YOU MUST PROVIDE ENOUGH INPUT POWER TO OPERATE THEM.

DUAL POWER INPUTS—Air Safe has 2 power inputs for larger power setups. The gear

channel input will provide power and a second input specifically for additional power

connection. For high power setups connect both the gear channel and the additional

battery connector to the receiver or Power Expander. DON'T connect a second battery

unless the second battery is the same voltage and type as the receiver battery.