Bose AV28 Installation Manual - Page 13

Browse online or download pdf Installation Manual for Home Theater System Bose AV28. Bose AV28 16 pages.
Also for Bose AV28: Test Procedure (4 pages)

Print Page

1. System Installation

Figure 11

AUX input connections

Using digital audio connections

Using optical digital audio connections

Connecting other playback equipment

Other playback components such as an audio CD changer can be connected to the AUX

inputs on the rear panel of the media center.

33V

DC POWE R

1.1A

SENSO R

ANTENNA

EMITTER

OPTICA L

SERIAL

DATA

INPU T

SPEAKER

ZONE S

If your TV, VCR, tape deck, or AUX component has electrical digital audio connections, you

may connect them to the media center using the corresponding DIGITAL connector. You will

need a 75Ω cable with RCA connectors (such as a video cable).

Note: Your system's DTS decoding is limited to playing back CDs and DVDs with DTS audio

tracks. DTS decoding of bitstreams from external sources is not supported, and your system

does not provide DTS bitstreams to external devices.

If your TV, VCR, tape deck, or AUX component has an optical digital audio connection, you

may connect it to the media center using the OPTICAL INPUT/OUTPUT connectors. You will

need an optical digital cable to make this connection.

Note: Before you can listen to a source through the OPTICAL input, you need to assign the

OPTICAL connection to TV, VCR, TAPE or AUX. See your operating guide for instructions on

using the system settings menus.

RECORD

TAPE

AUX

VC R

T V

VIDEO INPUTS

COMPOSITE

OPTICA L

DIGI T AL

DIGIT AL

DIGI T AL

OUTPU T

COMPOSITE

AUDIO OUTPUTS

AUDIO INPUTS

VIDEO OUTPUTS

AUDIO

OUT

CD changer or other playback equipment

Reference

S-VIDEO