Bose CineMate 120 Owner's Manual - Page 28

Browse online or download pdf Owner's Manual for Home Theater System Bose CineMate 120. Bose CineMate 120 32 pages. Soundtouch series ii wireless adapter
Also for Bose CineMate 120: User Manual (6 pages), Owner's Manual (22 pages), Quick Start Manual (2 pages)

Print Page

Care and Maintenance

Troubleshooting

Problem

What to do

No power

• Secure the Acoustimass

• Reconnect the Acoustimass module's and console's power cords firmly

into an AC (mains) outlet.

• Use the remote control to power on the system.

• Factory reset the system (see page 30).

No sound

• Unmute the system.

• Increase the volume.

• Plug the Acoustimass module and console into a live AC (mains) outlet.

• Insert the HDMI cable into a connector on your TV labeled ARC or Audio

Return Channe

secondary audio cable in addition to the HDMI cable (see page 14).

• If using a secondary audio cable, insert the cable into a connector on your

TV labeled Output or OUT, not Input or IN.

• Secure all cable connections on the soundbar, TV and connected sources.

• If your source is connected to your TV, select the correct TV input

(see page 23).

• Disconnect headphones when not in use.

• If connecting your source through the

using the System menu (see page 25).

• If you are connecting headphones to the

Headphones using the System menu (see page 25).

• If you see the error message Cannot find Acoustimass, pair the

Acoustimass module with the console (see page 29).

• Factory reset the system (see page 30).

Sound is

• Insert the HDMI cable into a connector on your TV labeled ARC or

coming from

Audio Return Channel (if available).

your TV

• Turn off your TV speakers (refer to your TV owner's guide).

speakers

• Decrease your TV volume to its lowest setting.

Remote

• Match the + and – symbols on the batteries with the + and – markings

control is

inside the compartment (see page 16).

inconsistent

• Replace the battery (see page 16).

or does not

• Press the volume button on the remote control and see if the correct

work

source button flashes.

• If using CEC:

- Point the remote control at the console.

- Program the remote to control your source (see page 22).

• If you have programmed the remote to control your source:

- Point the remote control at the appropriate source.

- Ensure you have entered the correct code for your source's brand.

- Program the remote with another code (see page 22).

28 - English

module's and console's power cords.

. If your TV does not have an HDMI ARC connector, use a

connector, enable Audio in

connector, enable