Bose SoundTouch 30 series II Owner's Manual - Page 11
Browse online or download pdf Owner's Manual for Home Theater System Bose SoundTouch 30 series II. Bose SoundTouch 30 series II 43 pages. Wi-fi
Also for Bose SoundTouch 30 series II: Owner's Manual (18 pages), Owner's Manual (22 pages), Owner's Manual (28 pages)
Print Page
Connecting the speakers and Lifestyle
Figure 5
Speaker cable connections to
the Jewel Cube speaker
AM199736_06_V.pdf
Once you have selected locations for your music system, connect the speakers.
CAUTION: Make sure all components are unplugged from the power outlet before you
begin hooking up the system.
Connecting the Jewel Cube
module
1. Match the correct cable to the corresponding speaker location.
• Front speaker cables have blue RCA connectors at one end, with L, R, or C molded
into both the RCA connectors and the Jewel Cube connectors at the other end.
• Surround speaker cables have orange RCA connectors at one end, with L or R molded
into both the RCA connectors and the Jewel Cube connectors at the other end.
2. Insert the Jewel Cube connector of each cable fully into the jack on the rear of one of the
five speakers (Figure 5). Match the ridge of the connector to the notch at the top of the
jack.
3. Connect each cable to the corresponding jack on the Acoustimass module.
a. Plug the blue connectors into the matching left front, center, and right front jacks.
b. Plug the orange connectors into the matching left surround and right surround jacks.
To lengthen the cable, connect speaker wire with male phono (RCA) plugs on each end to
your supplied speaker cable. Use a female-to-female adapter ("barrel" connector) or splice in
2
18-gauge (0.75 mm
) or thicker cord (connecting + to + and – to –). To purchase extension
wire, see your dealer or electronics store, or call Bose
October 28, 2001
music center
®
speakers to the Acoustimass
®
®
customer service.
Setting Up
®
9