Bose VIDEOWAVE Operating Manual - Page 10
Browse online or download pdf Operating Manual for Home Theater System Bose VIDEOWAVE. Bose VIDEOWAVE 35 pages. Entertainment system
Also for Bose VIDEOWAVE: Setup Manual (20 pages)
Print Page
English
TAB 2
Turning the system on/off
Press the power button on the
remote to start the system. When
the system starts up, it also
automatically turns on your set-top
box (cable, satellite, etc.).
The state of the power light on the
A/V control console and monitor
indicates the system status.
While the system starts up, the
monitor emits a start-up tone and
displays the Bose
®
logo with a
progress bar under it.
Note: When you turn the system on, it will always select
and turn on your cable or satellite box.
Note: To keep energy consumption to a minimum, the
system operates in a very low power state when it is off.
This is why the system may take several seconds to start.
To turn off the system, including the connected
source, press the power button.
TAB 3
TAB 4
TAB 5
TAB 6
B
S
ASIC
YSTEM
A/V control console power light
Status
Meaning
Red
Off
Blinking green
Starting up
Steady green
On and ready to use
Orange
Off and charging iPod
Blinking yellow for 30
Unify™ system setup was started, but is
seconds after shutting
incomplete
system down
Slow blinking red while
Unify system setup is complete, but no
system is off
sources are present
Red blinking off every 5
Remote control batteries are low
seconds
A/V monitor power light
Status
Meaning
Red
Off
Blinking green
Starting up
Steady green
Video muted (see page 18)
Off
On and ready to use
Slow blinking red
Power removed from A/V monitor but
not A/V control console
Slow blinking red to green
System is shutting down in 10 seconds
until power is restored
due to an error. If the problem persists,
contact Bose. See the contact sheet
included with your system
TAB 7
TAB 8
O
PERATION
11