Bose Companion 3 Series II Specifications - Page 2

Browse online or download pdf Specifications for Stereo System Bose Companion 3 Series II. Bose Companion 3 Series II 6 pages. Multimedia speaker system
Also for Bose Companion 3 Series II: Owner's Manual (40 pages), Owner's Manual (40 pages), Owner's Manual (22 pages), Owner's Manual (10 pages), Owner's Manual (20 pages), Owner's Manual (26 pages), Quick Setup Manual (2 pages), Quick Setup Manual (2 pages), Detailed Assembly Instructions (2 pages), Installation Manual (20 pages), Brochure & Specs (4 pages), Owner's Manual (19 pages), Service Manual (36 pages), Service Manual (16 pages)

Print Page
Bose Companion 3 Series II Specifications
Bose
®
FreeSpace
®
3-II system

TECHNICAL INFORMATION

FREESPACE 3-II SYSTEM
Frequency range
50 Hz to 16 kHz (±3dB)
System components
• FreeSpace 3-II Acoustimass
70V/100V/6 ohm (25W, 50W,
100W, 200W taps in mono or 6 Ω;
100W in mono or stereo)
PC 029386 white - one per box
PC 029686 black - one per box
• FreeSpace 3 satellite speaker
(surface-mount with bracket)
PC 025596 white - two per box
PC 025595 black - two per box
• FreeSpace 3F satellite speaker
(flush-mount)
PC 029387 white - two per box
PC 029827 black - two per box
Sensitivity
1
82dB-SPL @ 1W, 1 m (pink noise)
Maximum acoustic output
93dB-SPL average in a 45,000 ft
room, with an RT
of 1 second, ±3dB
60
1 Full bandwidth pink noise is amplified to a level at the loudspeaker terminals corresponding to 1W as referenced to the nominal impedance. The average sound pressure level (dB-SPL) is measured at 1 metre from
the speaker in an anechoic environment.
2 Full bandwidth pink noise is amplified to a level at the loudspeaker terminals corresponding to the long-term rated power handling of the speaker. The average sound pressure level (dB-SPL) is measured at 1 metre
from the speaker in an anechoic environment.
3 Full bandwidth pink noise, meeting International Electrotechnical Commission (IEC) Standard #268-5, with a spectrum corresponding to average program material.
4 Full bandwidth noise, meeting the IEC Standard #268-5 is amplified to a level at the loudspeaker terminals corresponding to the power handling of the loudspeaker. The loudspeaker must show no visible damage or
measurable loss of performance after 100 hours of continuous testing.
Long-term power handling
70/100V: 200W continuous
Low impedance: 100W continuous
Nominal impedance
®
module
2-satellite and 4-satellite, direct:
6Ω per channel
FREESPACE 3-II ACOUSTIMASS MODULE
(FS3B)
Frequency range
50 Hz to 210 Hz (±3dB)
Sensitivity
76dB @ 1W, 1 m (pink noise) per channel
79dB-SPL @ 1W, 1 m (pink noise) mono
Maximum acoustic output
96dB-SPL @ 1 m (pink noise and IEC
per channel
102dB-SPL @ 1 m (pink noise and IEC noise)
Long-term power handling
70/100V: 200W continuous (mono)
3
Low impedance: 50W per channel
stereo or 100W mono, continuous
4
1
2
3
noise)
4
Nominal impedance
Direct: 6Ω
Dispersion
Omnidirectional
Mechanical specifications
Dimensions:
15.4" (39.1 cm) outer flange diameter;
14.25" (36.1 cm) ceiling hole diameter;
7.5" (19.01 cm) height to top of housing
Weight: 14 lb (6.36 kg)
Fuses/protection: internal over-power
protection
FREESPACE 3-II SATELLITES
Frequency range
210 Hz to 16 kHz (±3dB)
Sensitivity
1
84dB-SPL @ 1W, 1 m (pink noise)
Maximum acoustic output
95dB-SPL @ 1 m (pink noise)
95dB-SPL @ 1 m (pink noise)
2