Bose ControlSpace AMS-8 Software Manual - Page 9

Browse online or download pdf Software Manual for Stereo System Bose ControlSpace AMS-8. Bose ControlSpace AMS-8 32 pages. Audio management system
Also for Bose ControlSpace AMS-8: User Manual (16 pages)

Print Page

1.3 Output Settings

1.3.1 Output Module

1. ControlSpace

With this module one can change the name of the output/room (12 characters max.), set the default source,

the default level, maximum level (or fixed level) and paging level of a room, increase/decrease the bass &

treble level, turn the Dynamic EQ on or off, select the Bose loudspeaker EQ curve or 16-band Graphic EQ,

add some delay to the output signal and one can change the output cards between mono to stereo.

Press or use the following buttons or faders to:

change or enter the name of the selected output/room

switch from a mono to a stereo output

switch from a stereo to a mono output

to turn the Dynamic EQ on or off (default setting is ON)**

set the Output level of the selected output/room to a fixed level. This function will lock (freeze)

the volume control on the Wall Controller, system rack and in the User software

set the Output level of the selected output/room to a variable level

upload the new Output settings to the AMS-8 system rack

(only possible if this button is highlighted in RED)

(upper) select an output/room which needs to be configured.

Click once on one of the listed outputs/rooms, shown in the info field, to select a room

(middle) select the default input/source. Click once on one of the listed inputs, shown in the info

field, to select a default input for the above room. Each time the system is started, each output/

room will start up with its default source

(lower) select a Bose loudspeaker EQ curve or 16-band Graphic EQ (GEQ).

Click once on one of the listed Bose EQ curves or the GEQ option, both shown in the info field,

to select between one of these functions

change the Default volume level (between -82dB & +18dB) of the selected output/room.

The default volume level is the audio level each room will start up with, each time the system is

started up. The default level can not exceed the maximum volume level of the selected output/room

AMS-8 LIvE Installer Software

™

Info Field