ABSCO SHEDS ADPATIO6030 Manual - Page 11

Browse online or download pdf Manual for Patio Furniture ABSCO SHEDS ADPATIO6030. ABSCO SHEDS ADPATIO6030 16 pages. Signature patio 6.12m w x 3.11m d x up to 3.18m h

Print Page
ATTACH Z FLASHING
11
Structure
Last
panel
10
Absco Industries
Assembly Instruction Manual
ABSCO SIGNATURE PATIO
MODEL: ADPATIO6030
6.12m W x 3.11m D x up to 3.18m H
10
10
Front
9. Starting at the left side, place a Z flashing TR35
in between the beam and the panel as pictured.
Align to be flush with:
• The left edge of the panel.
• Exterior of beam.
10. At the centre-most rib, Fasten through the
panel and flashing and into the beam with a tek
14 x 125 mm FAST104
11. Every second pan, fasten with tek screws with
neoprene washers FAST101
12. Carefully remove the tek 14 x 125 mm FAST104
from step 4 and insert the other Z flashing TR35.
11
Trim to length so it finishes flush with the edge of
the rightmost panel.
Refit screw through flashing and into original hole.
13. Next fit off the rest of the fixings.
NOTE: 3, 4 & 10 are the fixings done earlier.
• Fasten roof panels to beam with tek 14 x 125
mm FAST104 at the remaining positions.
3
• Use shorter tek screws with neoprene washers
FAST101 at the locations marked with 'x'
where the top skins overlap.
• Check there is a pop rivet every 300 mm along
First
the underside of the receiver channel
panel
• Check there is a tek screw with neoprene
washer FAST101 every second pan holding
the TR35 to the top skin
4
Model: ADPATIO6030
21/09/23
1.0
11