Bose Solo 10 series II Important Safety Instructions Manual - Page 10
Browse online or download pdf Important Safety Instructions Manual for Stereo System Bose Solo 10 series II. Bose Solo 10 series II 20 pages. Tv sound system
Also for Bose Solo 10 series II: Faq (3 pages), Service Manual (40 pages)
Print Page
Using the System
Programming the universal remote
You can program the universal remote to control your source, such
as a TV, DVD/Blu-ray Disc
player, cable/satellite box, game system
™
or DVR, by entering the code for your source's brand. There may
be several codes for your source. You may need to perform this
procedure multiple times to locate the correct code.
Locate your source's code
1.
Power on your source.
2.
Locate the code for your source's brand in the Universal
Remote Device Codes book (provided).
Enter your source's code
1.
On the remote control, press and hold the appropriate source
button until all six source buttons glow, then release.
For example, to program your TV, press and hold
all six source buttons glow, then release.
The appropriate source button continues to glow.
2.
On the number keypad, enter the code for your source's brand
and press + on the volume button.
Test your source's code
1.
Test your source for basic functions. Follow the instructions for
your source:
• TV: press the channel buttons. Press
menu appears. Press
• Cable/satellite box: press
guide appears. Press
• DVD or Blu-ray Disc
menu appears. Press
• Game system: press
your menu.
2.
Based on your source's response to basic functions:
• Remote responds accurately: press
programming and save your settings.
• Remote does not respond or does not respond
accurately:
- If your source button glows: press + on the volume
button to move to the next code. Repeat steps 1-2 in
"Test your source's code". You may need to repeat this
procedure 30 or more times. If all six buttons blink three
times, you have cycled through all codes for your source.
- If your source button is off: your remote exited program-
ming mode. Repeat steps 1-2 in "Enter your source's
code" and steps 1-2 in "Test your source's code".
Tip: After you exit programming mode, press the appropriate
source button to use your source.
Note: Your source may not be compatible with universal
remote controls. Refer to your source's owner's guide
for more information.
10 - English
. The settings
and
to navigate.
. The programming
and
to navigate.
player: press
. The settings
™
and
to navigate.
and
to navigate through
to exit
Customizing the power button
You can customize
on/off your system, TV and cable/satellite box simultaneously.
1.
Program your remote to control your TV and cable/satellite box
(see "Programming the universal remote").
2.
Press
seconds.
Both buttons flash three times.
Resyncing your cable/satellite box and TV
After customizing the power button, your cable/satellite box and TV
may become out of sync and not power on/off simultaneously. Use
the following steps to resync the system.
1.
Press the source button for the source that is out of sync.
until
2.
Press
3.
Press
.
Your sources power on/off simultaneously.
Switching between sources
You can switch from one source to another by pressing the
appropriate source button on the remote. For information on
connecting to a paired Bluetooth
Note: Before you begin, ensure you have correctly programmed
your sources.
1.
Press the button for the source you want to control.
The source button glows.
2.
Press
The source powers on.
3.
Press
Function buttons
The red, green, yellow and blue buttons on the remote control
correspond with the color-coded function buttons on your cable/
satellite box or teletext functions.
• Cable/satellite box functions: refer to your cable/satellite box's
owner's guide.
• Teletext functions: correspond with color-coded page numbers,
headings or shortcuts on a teletext display.
(power button) on your remote to power
and
simultaneously and hold for ten
to power on/off the source.
device, see page 13.
®
.
and select the correct input on your TV.