Bose SoundTouch Service Manual - Page 36

Browse online or download pdf Service Manual for Stereo System Bose SoundTouch. Bose SoundTouch 39 pages. Wireless pedestal
Also for Bose SoundTouch: Owner's Manual (33 pages), Owner's Manual (32 pages), Quick Start Manual (2 pages), Manual (9 pages), Owner's Manual (20 pages), Owner's Manual (32 pages), Quick Start Manual (5 pages), Start Here Manual (20 pages), Quick Start Manual (2 pages), Owner's Manual (18 pages), Quick Start Manual (5 pages), Quick Start Manual (2 pages)

Print Page

1. Connect to Router

1.1 No security

"airplay wifi profile [network_name]" connects

to a network w/ no security

1.2 WPA security

"airplay wpa profile [network_name] [security]

[passphrase]" for WPA where security is

TKIP or AES

1.3 WEP security

"airplay wep profile [network_name] [key]" for

WEP security

2. Play Song from Demo URL

2.1 View Current system configuration

"getpdo CurrentSystemConfiguration" will

print out the current values

2.2 Enter location of demo URL

"sys configuration DemoAudioURL http://

worldwide.bose.com/downloads/assets/

audio/take5.mp3"

2.3 Enable Demo

"sys configuration DemoNetworkEnabled

true"

2.4 Enter Demo mode

"demo enter"

2.5 Exit Demo Mode

"demo exit" or "sys reboot"

3. Enter Manufacturing mode

3.1 As soon as the unit starts to boot, hold

shift and press "U" repeatedly until "U-Boot#"

prompt is displayed. This will interupt the

normal boot process.

3.2 At the U-Boot# prompt, enter TAP com-

mand "setenv variant_mode mfg"

3.3 Enter TAP command "boot" to reboot unit

into manufacturing mode.

TAP COMMANDS

4. Set Country Code

The Wi-FI module can be set to EU or US

standard, which determines which Wi-Fi

channels are used. All countries outside the

US are set to the EU Code. EU 1-13 ch , US

1-11 ch

4.1 Enter Manufacturing Mode (Procedure 3)

4.2 At the "->" prompt, enter TAP command

"d dm870 cc (EU or US).

4.3 Enter TAP command "d reset" to reboot

into normal mode.

5. Check Country Code.

5.1 Type the command "local_services on"

and <enter>. Then press CTRL-C on the

keyboard. Then type "e" and <enter>. The

command line spotty login: should be dis-

played

on the computer.

5.2 Enter TAP command "root" and <enter>.

The command line should be

root@spotty:root#.

5.3 Enter "cat /var/tmp/mfgdata.xml" without

the quotes. The country code is displayed in

the first line of the response.

5.4 Return to CLI prompt by entering the

command "rm /mnt/nv/local_services" and

<enter>.

5.5 Enter the command "exit" and <enter>.

This will return to the TAP interface (CLI) and

a TAP command line "->" should be shown.