Bose Wave Radio Owner's Manual - Page 21

Browse online or download pdf Owner's Manual for Stereo System Bose Wave Radio. Bose Wave Radio 27 pages. Owner's guide
Also for Bose Wave Radio: Owner's Manual (16 pages), Owner's Manual (20 pages), Owner's Manual (12 pages), Quick Setup Manual (1 pages), Owner's Manual (26 pages)

Print Page
Bose Wave Radio Owner's Manual

Setting the alarms

Function
To select which alarm to set – On the control panel, press and hold Alarm
Set. Press Alarm Mode to select ALARM or ALARM 2. The indicator flashes
for the alarm you are setting.
On the remote, press Time. Press Alarm
to ALARM. The indicator flashes for the alarm you are setting.
To set the alarm time – On the control panel, hold down Alarm Set and
press Tuning up (") or down (#). The time display changes slowly at first,
then more quickly. Release Tuning to stop.
On the remote, press Time. Press Tuning up (") or down (#). The time dis-
play changes slowly at first, then more quickly. Release Tuning to stop. Press
Time to return to the current time display.
To set the alarm mode – On the control panel, after selecting the alarm,
release Alarm Set and press Alarm Mode to select one of the following alarm
modes (Press Alarm
on the remote):
For tone only, press until you see the
For radio only, press until you see the
For tone and radio, press until you see both indicators
When the alarm tone sounds, press Sleep/Snooze to turn the radio on. Press
Sleep/Snooze to pause the radio for 10 minutes.
To cancel the alarm mode – Follow the directions for setting the alarm
mode. Press Alarm Mode (control panel) or Alarm
display shows no alarm mode indicators.
To check the alarm setting – On the control panel, press and hold Alarm
Set to see the ALARM wakeup time and the preset station. While holding
Alarm Set, press Alarm Mode to see the ALARM 2 wakeup time and the pre-
set station.
On the remote, press Time to see the ALARM wakeup time. Press Alarm
to see the ALARM 2 wakeup time. Press Time again to return the dis-
play to the current time. ALARM 2 flashes for 10 seconds.
To wake to a preselected radio station – On the control panel, ONLY, select
ALARM or ALARM 2. Press and hold Alarm Set, and then press one of the six
station Presets buttons (you can change between AM and FM if needed). To
clear the preset, press and hold Alarm Set and press the button for that pre-
set again.
Note: There are two alarms indicated on the clock display as ALARM (primary) and ALARM 2
(secondary). You can set the wakeup time for either alarm with the radio on or off. The indica-
tor for the selected alarm flashes when setting time or mode. The ALARM 2 indicator contin-
ues flashing for 10 seconds after setting ALARM 2.
to select ALARM 2 or to return
indicator.
indicator.
(remote) until the
Control panel
Alarm
Set
.
Sleep/Snooze
Alarm Mode
Alarm
Set
Alarm
Set
Operating Your Wave
Alarm
Clock
Set
Alarm Mode
Set
Tuning
1
2
3
Presets
4
5
6
Volume
AUX
AM/FM
On/Off
Sleep/Snooze
Wave Radio
Remote control
Alarm Mode
Time
Alarm
Set
Time
Tuning
Alarm Mode
Alarm Mode
Time
Use the control panel to
select this feature.
1
2
3
Presets
4
5
6
®
Radio
Time
Alarm
Sleep
Tuning
Station
1
2
3
Presets
4
5
6
Mute
Volume
AM
On
AUX
FM
Off
Wave Radio
Alarm
Tuning
Sleep
19