Bose Wave Radio Owner's Manual - Page 13
Browse online or download pdf Owner's Manual for Stereo System Bose Wave Radio. Bose Wave Radio 26 pages. Owner's guide
Also for Bose Wave Radio: Owner's Manual (16 pages), Owner's Manual (20 pages), Owner's Manual (12 pages), Quick Setup Manual (1 pages), Owner's Manual (27 pages)
Print Page
Setting
Alarm 2
Function
To set the Alarm 2 time -
On the control panel, hold down ALARM
SET and press ALARM MODE
J'
'1))
until the ALARM
2
indicator
flashes. You have 10 seconds to begin setting the time. Hold ALARM
SET and press TUNING up or down. The time display changes slowly at
first, then more quickly. Release TUNING to stop.
On the remote, press TIME, then press ALARM
J'
'l)).
The ALARM 2
indicator flashes. You have 10 seconds to begin setting the time. Press
TUNING up or down. The time display changes slowly at first, then
more quickly. Release TUNING to stop. Press TIME to return the display
to the current time.
Note: The ALARM 2 indicator must be flashing to set Alarm 2 time.
Note: The ALARM
2 indicator continues flashing for 10 seconds after
the Alarm
2
wakeup time is set.
Note: You can set the alarm with the radio on or off.
To turn on the Alarm
2 function -
On the control panel, hold
down ALARM SET and press ALARM MODE
J'
'1))
until the ALARM 2
indicator flashes. Release ALARM SET.
On the remote, press TIME, then press ALARM
J'
'1)).
The ALARM 2
indicator flashes. Press TIME again.
With ALARM 2 flashing, press ALARMtMODE
J'
'1))
in sequence to
select the mode you want: tone, radio, both tone and radio, or off.
For tone only, press until the
'1))
indicator lights.
For radio only, press until the
J'
indicator lights.
For tone and radio, press until both indic2tors
J'
'1))
light. When the
alarm goes off, the tone sounds. Press SLEEP/SNOOZE to turn the
radio on. Press SLEEP/SNOOZE to pause the radio for 10 minutes.
Note: The ALARM 2 indicator must be flashing to set Alarm 2 sound.
Note: The ALARM
2 indicator continues flashing for 10 seconds after
the Alarm
2
sound is set.
~
ContrtPpanel
< ).( >
TUNING
~~
~~
SLEEP/SNOOZE
Remote control
(
TIME
)
(
.r
.0)
)
(
<
TUNING
>
)
(
TIME
)
(
.r
.0)
)
[
J.')
)
G
To turn off the Alarm 2 function -
On the control panel, hold
down ALARM SET and press ALARM MODE
J'
'l))
until the ALARM 2
indicator flashes. Release ALARM SET.
On the remote, press TIME, then press ALARM
J'
'l)).
The ALARM 2
indicator flashes. Press TIME again.
With ALARM 2 flashing, press ALARMtMODE
J'
'1))
until the display
shows no Alarm
2
mode indicators.
To check the Alarm 2 setting -
On the control panel, hold down
ALARM SET and press ALARM MODE
J'
'l))
to see the wakeup time.
On the remote, press TIME, then press ALARM
J'
'1))
to see the wakeup
time. ALARM 2 flashes for 10 seconds.
To wake to a preselected radio station with Alarm 2 -
While
ALARM
2
flashes, hold down ALARM SET and press the PRESET
button for the station you want (change between AM and FM if needed).
(ALARM)
~
[
TIME
)
SET
AURMMODE
@
(
.r .. )
)
AURMMODE
[
J ..' )
1
(ALARM)
.l"»
(
TIME
)
SET
(
.r .•)
)
(ALARM)
000
Use the control panel
SET
dob
to select this feature.
13