Bose SoundTouch 30 Owner's Manual - Page 29

Browse online or download pdf Owner's Manual for Media Converter Bose SoundTouch 30. Bose SoundTouch 30 30 pages. Enabling standby low power mode
Also for Bose SoundTouch 30: Owner's Manual (26 pages), Quick Start Manual (2 pages), Owner's Manual (40 pages), Owner's Manual (32 pages), Manual (9 pages), Quick Start Manual (2 pages)

Print Page

You can set up your speaker using a computer rather than a smartphone or tablet.

• Position your speaker next to your computer.

• Make sure your computer is on your Wi-Fi network.

• Obtain a USB A to USB Micro B cable (not provided).

Notes:

• A USB A to USB Micro B cable is commonly used for charging mobile devices. You

can also purchase this at your local electronics store. If you don't have this cable,

contact Bose customer service.

• The USB connector on the back of your speaker is for computer setup only. The

USB connector is not designed to charge smartphones, tablets, similar devices or

the speaker itself.

During setup, the app prompts you to temporarily connect the USB cable from the

computer to your speaker. Do not connect the USB cable until the app instructs you to

do so.

1. Plug the power cord into an AC (mains) power outlet.

2. On your computer, open a browser and go to:

global.Bose.com/Support/ST30III

Tip: Use the computer where your music library is stored.

3. Download and run the SoundTouch® app.

The app guides you through setup.

4. After setup is complete, disconnect the USB cable from your computer and from

your speaker. Move your speaker to its permanent location.

A P P E N D I X : C O M P U T E R S E T U P

E N G L I S H - 2 9