Bose SoundTouch 30 Owner's Manual - Page 4
Browse online or download pdf Owner's Manual for Media Converter Bose SoundTouch 30. Bose SoundTouch 30 30 pages. Enabling standby low power mode
Also for Bose SoundTouch 30: Owner's Manual (26 pages), Quick Start Manual (2 pages), Owner's Manual (40 pages), Owner's Manual (32 pages), Manual (9 pages), Quick Start Manual (2 pages)
Print Page
R E G U L AT O R Y I N F O R M AT I O N
Bose Corporation hereby declares that this product is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements.
The complete declaration of conformity can be found at: www.Bose.com/compliance
The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in
compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU)
No. 801/2013.
Required Power State Information
Power consumption in specified power mode, at
230V/50Hz input
Time after which equipment is automatically
switched into mode
Power consumption in networked standby if all wired
network ports are connected and all wireless network
ports are activated, at 230V/50Hz input
Network port deactivation/activation procedures.
Deactivating all networks will enable standby mode.
For Europe:
Frequency band of operation 2400 to 2483.5 MHz:
• Bluetooth/Wi-Fi: Maximum transmit power less than 20 dBm EIRP.
• Bluetooth Low Energy: Maximum power spectral density less than 10 dBm/MHz EIRP.
Frequency bands of operation 5150 to 5350 MHz and 5470 to 5725 MHz:
• Wi-Fi: Maximum transmit power less than 20dBm EIRP.
• This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in all EU Member
States listed in the table.
BE
DK
AT
SE
LT
MT
RO
LU
4 - E N G L I S H
Wi-Fi: Deactivate by pressing and holding C and z on the unit until the
Wi-Fi indicator turns off. Activate by pressing and holding C and z on the
unit until the Wi-Fi indicator turns on.
Bluetooth: Deactivate by clearing the pairing list by pressing and holding
the Bluetooth/Auxiliary button
indicator blinks white. Reactivate by pairing with a Bluetooth source.
Ethernet: Deactivate by removing the Ethernet cable. Activate by inserting
the Ethernet cable.
IE
UK
BG
DE
PL
CZ
NL
SI
Power Modes
Standby
< 0.5 W
< 2.5 hours
N/A
on the unit until the Bluetooth
FR
CY
PT
EL
EE
FI
Networked Standby
all network types ≤ 3.0 W
≤ 20 minutes
≤ 3.0 W
SK
HU
HR
LV
ES
IT