Bose FreeSpace E4 Series II Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Amplifier Bose FreeSpace E4 Series II. Bose FreeSpace E4 Series II 16 pages. Business music system
Also for Bose FreeSpace E4 Series II: Owner's Manual (18 pages), Quick Start Up Manual (4 pages), Owner's Manual (15 pages), Owner's Manual (33 pages)

Print Page
Bose FreeSpace E4 Series II Owner's Manual

3.2 Rear panel

1
SENSE MICROPHONES
ZONE 1
ZONE 2 ZONE 3
WALL PLATE CONNECTIONS
3
1
2
3
4
5
AUDIO SOURCE
AUX MIC/
LINE 1
LINE 2
LINE 3

3.2.1 System controls

1
SENSE MICROPHONES – Input connectors for sensing
microphones used with the Auto Volume feature. See the Auto
Volume Kit.
2
RS-232 – Standard RS-232 communications port. Provides
a communications interface for a PC running FreeSpace
Installer™ software. The Installer™ software is used to configure
the E4 hardware.
3
WALL PLATE CONNECTIONS – Input connectors for Stan-
dard, Auto Volume, and Paging Zone user interfaces.
4
REMOTE ON/OFF – An input connector for a remote
STANDBY switch.

3.2.2 Audio source inputs

5
LINE 1/LINE 2 – Unbalanced audio inputs
AUX MIC/LINE 3 – Balanced audio input with phantom power
PAGE/MIC/LINE 4 – Balanced audio input with phantom power
DIRECT IN/CONTROL – Balanced (DSP bypass at max. power)
3.0 E4 Hardware Description
2
RS232
ZONE 4
8
4
7
MUSIC ON
REMOT E
ZONE 4
HOLD/
ON/OF F
LINE OUT
PBX OUT
12V
S
P AGE/ MIC/
DIRECT IN
/
LINE 4
CONTROL
PTT
PTT
6
USE ONLY CLASS 2 WIRING
1
CONNECTOR
ORIENTATIO N
3
®
LISTED 917D
T
ü
V Rheinland
AUDIO
EQUIPMENT
This device complies with part 15 of the FCC rules. Operation is
subject to the following conditions: (1)This device may not caus e
harmful interference and (2)this device must accept any interference
received, including
interference which may cause undesired operation.
Complies with Canadian ICES-003 Class

3.2.3 Amplifier outputs

6
ZONE OUT 1/2/3/4 – Speaker connections for four zones
Installer's Note: Please notice the polarity markings when
wiring speaker cables to the ZONE OUT connectors.
CAUTION: DO NOT ground the minus (–) terminals.
®
7
ZONE 4 LINE OUT – A line-level output that duplicates the
program material from LINE 4. May be used to feed another
amplifier installed for a large zone. The 12V control output is used
to connect to Bose
8
MUSIC ON HOLD/PBX OUT – An audio output used to
provide music input to a PBX system

3.2.4 AC power

9
OUTPUT VOLTAGE – Sets the ZONE OUT lines to 70/100V.
Set fuse box to 100/120V for 70V; 220/240V for 100V
10
POWER ON/OFF – Switches AC power on or off
11
Fuse box – Configures the E4 for 100/120V or 220/240V. Set
OUTPUT VOLTAGE to 70V for 100/120V; 100V for 220/240V.
12
AC line cord jack – AC line voltage input
24 of 80
RISK OF ELECTRICA
L SHOCK
RISQUE DE CHOC ELECTRIQUE
DO NOT OPEN
NE P AS OUVRI R
ZONE OUT
2
9
ZONE OUT
OUTPUT
4
VOLTAGE
70V
100V
100/120V~AC T6.25A, L250V
220/240V~AC T3.15A, L250V
DO NOT SWITCH
WHILE POWER IS ON
300W MAX
geprüfte
FreeSpace E4 Series II
Sicherheit
400 Watt System Electronics
Bose Corporation, Framingham, MA
Made in the U.S.A.
A Spec.
®
amplifier sequence inputs.
10
ON
POWER
OFF
11
50/60H z
12
01701-9168