Bose L1 model 1S system Owner's Manual - Page 19

Browse online or download pdf Owner's Manual for Amplifier Bose L1 model 1S system. Bose L1 model 1S system 22 pages. With tonematch port

Print Page

English

Deutsch

Español

Dansk

Caring for your product

Troubleshooting

Problem

System is plugged in,

power switch is on, but

power LED is off

Power LED is on (green),

but no sound

Power LED is red while the

power stand is on

House circuit breaker

keeps tripping

Français

Deutsch

Italiano

Nederlands

Español

Cleaning

• Clean the product enclosures using only a soft, dry cloth.

• Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, 

or abrasives.

• Do not use any sprays near the product or allow liquids to spill into any openings.

• If necessary, you may carefully vacuum the grille of the L1

Getting service

For additional help in solving problems, contact Bose

and Technical Support Team at (877) 335-2673 or visit our support area online at

www.Bose.com/livesound.

If you experience problems while using this product, try the following solutions. If you still

can't solve the problem, please call the Bose Live Music Product and Technical Support

Team direct at (877) 335-2673 to arrange for service.

Recommended troubleshooting tools

• Portable voltmeter

• Cable tester

• AC outlet tester

What to do

• Make sure you have power at the AC outlet. Try operating a lamp or other equipment

from the same AC outlet or test the outlet using an AC outlet tester.

• Make sure the power stand's power cord plug is fully inserted into the AC outlet.

• Make sure volume control is turned up on your instrument.

• Make sure the Trim level control is turned up on the power stand.

• Make sure your instrument is plugged into the Analog Input jack.

• Connect your instrument to the power stand using a different cable.

• Plug your instrument into a different amplifier to make sure the instrument is working.

• Please call Bose Live Music Customer Support at (877) 335-2673 for assistance.

• If more than one power stand is plugged into the same AC circuit, stagger the turn-on

times. Each power stand has an inrush current of about 32 amps when turned on.

• If you have more than three power stands plugged into a single 15 amp circuit, move

some systems to another AC circuit. Each power stand can draw 5 amps or more when

playing at high volumes for long periods of time.

Venice_Care+Maint.fm

Svenska

Français

Italiano

ARE AND

Live Music Customer Service Product

• XLR and ¼" phone plug cables

• B1 bass module 4-wire cable

• Spare AC power cord

4/12

Nederlands

Svenska

ARE AND

AINTENANCE

loudspeaker.