Bose Acoustic Wave music system II. Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Headsets Bose Acoustic Wave music system II.. Bose Acoustic Wave music system II. 30 pages. Owner's guide
Also for Bose Acoustic Wave music system II.: Owner's Manual (28 pages), Owner's Manual (30 pages), Owner's Manual (20 pages), User Manual (25 pages), Owner's Manual (13 pages), Owner's Manual (6 pages), Owner's Manual (2 pages), Quick Setup Manual (2 pages), Owner's Manual (30 pages), Owner's Manual (12 pages), Owner's Manual (29 pages), Owner's Manual (29 pages), Owner's Manual (30 pages)

Print Page

Connecting to power

Figure 2

Connecting the power cord

Setting Up Your Acoustic Wave

1. Plug the small end of the power cord into the power jack on the back of your Acoustic

Wave

music system II (Figure 2).

2. Plug the other end of the power cord into an AC power (mains) outlet.

CAUTION: Do not cover the ventilation openings, which provide cooling for the built-in electronic

circuitry. Blocking the ventilation openings can cause the system to overheat, resulting in possible

damage to the system.

Note: The Acoustic Wave

"Operating on DC power" on page 9.

Note: Bose recommends using a safety agency-approved surge protector on all electronic

equipment. Voltage variations and spikes can damage electronic components in any system.

A quality suppressor can eliminate the vast majority of failures attributed to surges and may be

purchased at electronics stores.

We encourage you to begin by listening to the demonstration CD included with your Acoustic

Wave

music system II. It will demonstrate the deep, rich musical performance this system is

designed to deliver.

For instructions on playing CDs, see "Playing Compact Discs" on page 10.

Ventilation openings – DO NOT BLOCK

music system II also can be powered from a 12V DC source. See

Music System II