Bose Lifestyle 35 Series II Installation Manual - Page 19

Browse online or download pdf Installation Manual for Headsets Bose Lifestyle 35 Series II. Bose Lifestyle 35 Series II 36 pages. Noise cancelling
Also for Bose Lifestyle 35 Series II: Installation Manual (42 pages), Owner's Manual (25 pages), Owner's Manual (24 pages), Owner's Manual (13 pages), Quick Setup Manual (3 pages), Operating Manual (46 pages), Owner's Manual (36 pages), Owner's Manual (32 pages), Quick Start Manual (2 pages), Factory Reset (2 pages), Quick Start Manual (2 pages), Owner's Manual (38 pages)

Print Page

Connecting the system to power

Figure 14

Power connection for

the Acoustimass module

Note: Bose recommends using a quality surge suppressor on all electronics equipment.

Voltage variations and spikes can damage electronic components in any system. A quality

suppressor can eliminate the vast majority of failures attributed to surges and may be pur-

chased at electronics stores.

Connect the two AC power (mains) cords in the following order:

1. Plug the small end of the Acoustimass

the connector panel of the Acoustimass module (Figure 14).

2. Plug the other end of the power cord into an AC (mains) outlet.

3. Turn the Acoustimass module POWER switch to on.

Note: For dual voltage units (sold in certain areas), make sure the voltage setting on the bot-

tom of the media center power supply matches the local power rating (Figure 15). Check with

local electrical authorities if you are not sure of the appropriate power rating.

System Installation

module power cord into the AC power jack on

Acoustimass module

connector panel

Power switch

| = ON

O = OFF