AirTek AT075AE User Manual - Page 6
Browse online or download pdf User Manual for Air Conditioner AirTek AT075AE. AirTek AT075AE 15 pages. Portable evaporative air cooler
Print Page
USE & OPERATION (CONTINUED)
LOW WATER ALARM
The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the
minimum level, you will hear a beeping sound and the indicator light will flash continuously. The unit will
automatically pause evaporative cooling.
Refill the water tank to deactivate the alarm in cooling mode. First switch OFF the unit and unplug from
the power outlet. Fill the water tank with water above the minimum water level mark. Plug in and switch
ON again.
To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch the unit
OFF and then ON again. The Low Water Alarm will not activate in Fan only mode. The Low Water Alarm
will sound again if the COOL function is activated while the water tank is still empty.
CLEANING & DRAINING THE WATER TANK
Below are instructions on how to clean and maintain your air cooler. If the cooler will not be used for
a long period of time, please refer to the STORAGE & MAINTENANCE GUIDELINES located in the
separate Safety & Maintenance Guide.
WARNING:
Before cleaning the unit, switch the unit OFF and disconnect from the electrical socket.
Move the unit to a location where the water can be drained. Remove the cap from the Drain plug
•
located at the bottom of the unit. Allow the tank to empty.
Refill the water tank with clean water and drain it completely.
•
Refill the water tank with clean water, up to the maximum level.
•
Use a damp cloth to remove the dirt and dust from the surface of the unit. Never use corrosive
•
elements or chemicals to clean this product.
When the product is not in use, store the unit in a dry place out of direct sunlight.
•
5
EN