Drone Amplified Ignis Firmware Update Instructions - Page 5

Browse online or download pdf Firmware Update Instructions for Security System Drone Amplified Ignis. Drone Amplified Ignis 6 pages.

Print Page

Ignis Firmware Update Instructions

Expand the "Ports (COM & LPT)" dropdown menu, and you should see something on

one of the COM ports. In Figure 4, Ignis is on COM11. Remember the COM port you see

and close the Device Manager.

In LM Flash Programmer, set the COM Port to the COM Port that showed up in Device

Manager, as shown in Figure 3. Set the Baud Rate to 460800. The conguration tab of LM

Flash Programmer should match Figure 3, except for the COM Port.

6 Program Ignis

Next, go to the "Program" tab of LM Flash Programmer, which should look similar to Figure

Last Updated May 10, 2018

Figure 4: Windows Device Manager.

Drone Amplied

Page 5