DROPSA 1524175 Series Operation And Maintenance Manual - Page 7
Browse online or download pdf Operation And Maintenance Manual for Water Pump DROPSA 1524175 Series. DROPSA 1524175 Series 8 pages. Pneumatic pumps for grease
Print Page
9. MAINTENANCE
The pump has been designed and built in a way to require minimum maintenance.
In order to simplify maintenance, we recommend installing it in a position that is easy to reach (see section 6.2).
Periodically check the joints of the lines for any leaks. Moreover, always keep the pump clean in order to quickly detect any
leaks.
The pump does not require special tools for any check and/or maintenance operations. We recommend using tools and
personal protection equipment (gloves) suitable for use with reference to Legislative Decree 81/08, and in good condition in
order to prevent damage to personnel or parts of the machine.
10. DISPOSAL
During maintenance on the pump, or in the event of its demolition, do not dispose of contaminated parts into the
environment. See local regulations for their correct disposal. Upon demolition of the machine, the identification label and
any other document must be destroyed.
11. ORDERING INFORMATION AND DIMENSIONS
Kit code
1524175
Kit for 20 kg. (44 lb) drum made up of: pump-drum cover-gun-1.5 m (59 in.) hose (59 in.)
Spare parts
code
1524344
50:1 ratio pneumatic pump
3132485
Dip pipe kit (figure on page 3 positions: 50 - 70)
3132486
Dip pipe kit gaskets
Motor body kit (made up of the positions: 1,2,4-11,15-22,24,26-29,31,33 of the figure on
3132487
page 4)
3132488
Motor gaskets kit (made up of the positions: 3,12,14,23,25,30,32 of the figure on page 4)
480 mm (18.9")
Gross weight of Kit 1524175: 8.2 Kg (18 lb)
12. HANDLING AND TRANSPORT
Before shipment, the pumps are carefully packed inside a cardboard box. During transport and storage, pay attention to the
direction indicated on the box.
Upon receipt, check that the packaging is not damaged and store the equipment in a dry place.
Given the low weight of the pump, handling it does not require the use of hoisting equipment.
Description
Description
260 mm (10.2")
7